Minix Man Pages

Man Page or Keyword Search:
Man Architecture
Apropos Keyword Search (all sections) Output format
home | help
x minix x
x minixx
SETPRIV(1)                       User Commands                      SETPRIV(1)

NAME
       setpriv - run a program with different Linux privilege settings

SYNOPSIS
       setpriv [options] program [arguments]

DESCRIPTION
       Sets  or  queries  various  Linux privilege settings that are inherited
       across execve(2).

       In comparison to su(1) and runuser(1), setpriv(1) neither uses PAM, nor
       does it prompt for a password.  It is a simple, non-set-user-ID wrapper
       around execve(2), and can be used to drop privileges in the same way as
       setuidgid(8)  from  daemontools,  chpst(8) from runit, or similar tools
       shipped by other service managers.

OPTION
       --clear-groups
              Clear supplementary groups.

       -d, --dump
              Dump current privilege state.  Can be specified more  than  once
              to  show  extra, mostly useless, information.  Incompatible with
              all other options.

       --groups group...
              Set supplementary groups.  The  argument  is  a  comma-separated
              list of GIDs or names.

       --inh-caps  (+|-)cap...   or   --ambient-caps (+|-)cap...  or  --bound-
       ing-set (+|-)cap...
              Set the inheritable capabilities, ambient  capabilities  or  the
              capability  bounding set.  See capabilities(7).  The argument is
              a comma-separated list of +cap and -cap entries,  which  add  or
              remove an entry respectively. cap can either be a human-readable
              name as seen in capabilities(7) without the cap_  prefix  or  of
              the  format cap_N, where N is the internal capability index used
              by Linux.  +all and -all can be used to add or remove all  caps.
              The  set  of  capabilities starts out as the current inheritable
              set for --inh-caps, the current ambient set  for  --ambient-caps
              and  the  current  bounding set for --bounding-set.  If you drop
              something from the bounding set without also  dropping  it  from
              the  inheritable set, you are likely to become confused.  Do not
              do that.

       --keep-groups
              Preserve supplementary groups.  Only useful in conjunction  with
              --rgid, --egid, or --regid.

       --init-groups
              Initialize  supplementary groups using initgroups(3).  Only use-
              ful in conjunction with --ruid or --reuid.

       --list-caps
              List all known capabilities.   This  option  must  be  specified
              alone.

       --no-new-privs
              Set the no_new_privs bit.  With this bit set, execve(2) will not
              grant new privileges.  For example,  the  set-user-ID  and  set-
              group-ID  bits  as  well  as file capabilities will be disabled.
              (Executing binaries with these bits set  will  still  work,  but
              they  will not gain privileges.  Certain LSMs, especially AppAr-
              mor, may result in failures to execute certain programs.)   This
              bit  is  inherited  by child processes and cannot be unset.  See
              prctl(2) and Documentation/prctl/no_new_privs.txt in  the  Linux
              kernel source.

              The no_new_privs bit is supported since Linux 3.5.

       --rgid gid, --egid gid, --regid gid
              Set  the real, effective, or both GIDs.  The gid argument can be
              given as textual group name.

              For safety, you must specify one  of  --clear-groups,  --groups,
              --keep-groups, or --init-groups if you set any primary gid.

       --ruid uid, --euid uid, --reuid uid
              Set  the real, effective, or both UIDs.  The uid argument can be
              given as textual login name.

              Setting a uid or gid does not change capabilities, although  the
              exec  call  at  the  end  might change capabilities.  This means
              that, if you are root, you probably want to do something like:

                      setpriv --reuid=1000 --regid=1000 --inh-caps=-all

       --securebits (+|-)securebit...
              Set or clear securebits.   The  argument  is  a  comma-separated
              list.   The  valid  securebits are noroot, noroot_locked, no_se-
              tuid_fixup,   no_setuid_fixup_locked,   and    keep_caps_locked.
              keep_caps is cleared by execve(2) and is therefore not allowed.

       --pdeathsig keep|clear|<signal>
              Keep, clear or set the parent death signal.  Some LSMs, most no-
              tably SELinux and AppArmor, clear the signal when  the  process'
              credentials  change.   Using  --pdeathsig  keep will restore the
              parent death signal after changing credentials  to  remedy  that
              situation.

       --selinux-label label
              Request  a  particular SELinux transition (using a transition on
              exec, not dyntrans).  This will fail  and  cause  setpriv(1)  to
              abort  if  SELinux  is not in use, and the transition may be ig-
              nored or cause execve(2) to fail at SELinux's whim.  (In partic-
              ular,   this   is   unlikely   to   work   in  conjunction  with
              no_new_privs.)  This is similar to runcon(1).

       --apparmor-profile profile
              Request a particular AppArmor profile  (using  a  transition  on
              exec).  This will fail and cause setpriv(1) to abort if AppArmor
              is not in use, and the transition may be ignored  or  cause  ex-
              ecve(2) to fail at AppArmor's whim.

       --reset-env
              Clears  all  the  environment variables except TERM; initializes
              the environment variables HOME, SHELL, USER,  LOGNAME  according
              to   the   user's   passwd   entry;   sets   PATH   to  /usr/lo-
              cal/bin:/bin:/usr/bin  for  a  regual  user  and   to   /usr/lo-
              cal/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin for root.

              The  environment variable PATH may be different on systems where
              /bin and /sbin are merged into /usr.  The  environment  variable
              SHELL  defaults to /bin/sh if none is given in the user's passwd
              entry.

       -V, --version
              Display version information and exit.

       -h, --help
              Display help text and exit.

NOTES
       If applying any specified option fails, program will  not  be  run  and
       setpriv will return with exit code 127.

       Be  careful  with  this  tool -- it may have unexpected security conse-
       quences.  For example, setting no_new_privs and then execing a  program
       that  is  SELinux-confined  (as  this  tool  would  do) may prevent the
       SELinux restrictions from taking effect.

EXAMPLE
       If you're looking for behaviour similar to su(1)/runuser(1), or sudo(8)
       (without the -g option), try something like:

           setpriv --reuid=1000 --regid=1000 --init-groups

       If you want to mimic daemontools' setuid(8), try:

           setpriv --reuid=1000 --regid=1000 --clear-groups

SEE ALSO
       runuser(1), su(1), prctl(2), capabilities(7)

AUTHOR
       Andy Lutomirski <luto@amacapital.net>

AVAILABILITY
       The  setpriv command is part of the util-linux package and is available
       from Linux Kernel Archive <https://www.kernel.org/pub/linux/utils/util-
       linux/>.

util-linux                         July 2014                        SETPRIV(1)

NAME | SYNOPSIS | DESCRIPTION | OPTION | NOTES | EXAMPLE | SEE ALSO | AUTHOR | AVAILABILITY