Minix Man Pages

Man Page or Keyword Search:
Man Architecture
Apropos Keyword Search (all sections) Output format
home | help
REGEX(3)                 BSD Library Functions Manual                 REGEX(3)

NAME
     regex, regcomp, regexec, regerror, regfree -- regular-expression library

LIBRARY
     Standard C Library (libc, -lc)

SYNOPSIS
     #include <regex.h>

     int
     regcomp(regex_t * restrict preg, const char * restrict pattern,
         int cflags);

     int
     regexec(const regex_t * restrict preg, const char * restrict string,
         size_t nmatch, regmatch_t pmatch[], int eflags);

     size_t
     regerror(int errcode, const regex_t * restrict preg,
         char * restrict errbuf, size_t errbuf_size);

     void
     regfree(regex_t *preg);

DESCRIPTION
     These routines implement IEEE Std 1003.2-1992 ("POSIX.2") regular
     expressions (``RE''s); see re_format(7).  regcomp() compiles an RE
     written as a string into an internal form, regexec() matches that
     internal form against a string and reports results, regerror() transforms
     error codes from either into human-readable messages, and regfree() frees
     any dynamically-allocated storage used by the internal form of an RE.

     The header <regex.h> declares two structure types, regex_t and
     regmatch_t, the former for compiled internal forms and the latter for
     match reporting.  It also declares the four functions, a type regoff_t,
     and a number of constants with names starting with ``REG_''.

     regcomp() compiles the regular expression contained in the pattern
     string, subject to the flags in cflags, and places the results in the
     regex_t structure pointed to by preg.  cflags is the bitwise OR of zero
     or more of the following flags:

     REG_EXTENDED     Compile modern (``extended'') REs, rather than the
                      obsolete (``basic'') REs that are the default.

     REG_BASIC        This is a synonym for 0, provided as a counterpart to
                      REG_EXTENDED to improve readability.

     REG_NOSPEC       Compile with recognition of all special characters
                      turned off.  All characters are thus considered
                      ordinary, so the ``RE'' is a literal string.  This is an
                      extension, compatible with but not specified by IEEE Std
                      1003.2-1992 ("POSIX.2"), and should be used with caution
                      in software intended to be portable to other systems.
                      REG_EXTENDED and REG_NOSPEC may not be used in the same
                      call to regcomp().

     REG_ICASE        Compile for matching that ignores upper/lower case
                      distinctions.  See re_format(7).

     REG_NOSUB        Compile for matching that need only report success or
                      failure, not what was matched.

     REG_NEWLINE      Compile for newline-sensitive matching.  By default,
                      newline is a completely ordinary character with no
                      special meaning in either REs or strings.  With this
                      flag, `[^' bracket expressions and `.' never match
                      newline, a `^' anchor matches the null string after any
                      newline in the string in addition to its normal
                      function, and the `$' anchor matches the null string
                      before any newline in the string in addition to its
                      normal function.

     REG_PEND         The regular expression ends, not at the first NUL, but
                      just before the character pointed to by the re_endp
                      member of the structure pointed to by preg.  The re_endp
                      member is of type const char *.  This flag permits
                      inclusion of NULs in the RE; they are considered
                      ordinary characters.  This is an extension, compatible
                      with but not specified by IEEE Std 1003.2-1992
                      ("POSIX.2"), and should be used with caution in software
                      intended to be portable to other systems.

     When successful, regcomp() returns 0 and fills in the structure pointed
     to by preg.  One member of that structure (other than re_endp) is
     publicized: re_nsub, of type size_t, contains the number of parenthesized
     subexpressions within the RE (except that the value of this member is
     undefined if the REG_NOSUB flag was used).  If regcomp() fails, it
     returns a non-zero error code; see DIAGNOSTICS.

     regexec() matches the compiled RE pointed to by preg against the string,
     subject to the flags in eflags, and reports results using nmatch, pmatch,
     and the returned value.  The RE must have been compiled by a previous
     invocation of regcomp().  The compiled form is not altered during
     execution of regexec(), so a single compiled RE can be used
     simultaneously by multiple threads.

     By default, the NUL-terminated string pointed to by string is considered
     to be the text of an entire line, minus any terminating newline.  The
     eflags argument is the bitwise OR of zero or more of the following flags:

     REG_NOTBOL     The first character of the string is not the beginning of
                    a line, so the `^' anchor should not match before it.
                    This does not affect the behavior of newlines under
                    REG_NEWLINE.

     REG_NOTEOL     The NUL terminating the string does not end a line, so the
                    `$' anchor should not match before it.  This does not
                    affect the behavior of newlines under REG_NEWLINE.

     REG_STARTEND   The string is considered to start at string +
                    pmatch[0].rm_so and to have a terminating NUL located at
                    string + pmatch[0].rm_eo (there need not actually be a NUL
                    at that location), regardless of the value of nmatch.  See
                    below for the definition of pmatch and nmatch.  This is an
                    extension, compatible with but not specified by IEEE Std
                    1003.2-1992 ("POSIX.2"), and should be used with caution
                    in software intended to be portable to other systems.
                    Note that a non-zero rm_so does not imply REG_NOTBOL;
                    REG_STARTEND affects only the location of the string, not
                    how it is matched.

     See re_format(7) for a discussion of what is matched in situations where
     an RE or a portion thereof could match any of several substrings of
     string.

     Normally, regexec() returns 0 for success and the non-zero code
     REG_NOMATCH for failure.  Other non-zero error codes may be returned in
     exceptional situations; see DIAGNOSTICS.

     If REG_NOSUB was specified in the compilation of the RE, or if nmatch is
     0, regexec() ignores the pmatch argument (but see below for the case
     where REG_STARTEND is specified).  Otherwise, pmatch points to an array
     of nmatch structures of type regmatch_t.  Such a structure has at least
     the members rm_so and rm_eo, both of type regoff_t (a signed arithmetic
     type at least as large as an off_t and a ssize_t), containing
     respectively the offset of the first character of a substring and the
     offset of the first character after the end of the substring.  Offsets
     are measured from the beginning of the string argument given to
     regexec().  An empty substring is denoted by equal offsets, both
     indicating the character following the empty substring.

     The 0th member of the pmatch array is filled in to indicate what
     substring of string was matched by the entire RE.  Remaining members
     report what substring was matched by parenthesized subexpressions within
     the RE; member i reports subexpression i, with subexpressions counted
     (starting at 1) by the order of their opening parentheses in the RE, left
     to right.  Unused entries in the array--corresponding either to
     subexpressions that did not participate in the match at all, or to
     subexpressions that do not exist in the RE (that is, i > preg-_re_nsub)
     --have both rm_so and rm_eo set to -1.  If a subexpression participated
     in the match several times, the reported substring is the last one it
     matched.  (Note, as an example in particular, that when the RE `(b*)+'
     matches `bbb', the parenthesized subexpression matches each of the three
     `b's and then an infinite number of empty strings following the last `b',
     so the reported substring is one of the empties.)

     If REG_STARTEND is specified, pmatch must point to at least one
     regmatch_t (even if nmatch is 0 or REG_NOSUB was specified), to hold the
     input offsets for REG_STARTEND.  Use for output is still entirely
     controlled by nmatch; if nmatch is 0 or REG_NOSUB was specified, the
     value of pmatch [0] will not be changed by a successful regexec().

     regerror() maps a non-zero errcode from either regcomp() or regexec() to
     a human-readable, printable message.  If preg is non-NULL, the error code
     should have arisen from use of the regex_t pointed to by preg, and if the
     error code came from regcomp(), it should have been the result from the
     most recent regcomp() using that regex_t.  (regerror() may be able to
     supply a more detailed message using information from the regex_t.)
     regerror() places the NUL-terminated message into the buffer pointed to
     by errbuf, limiting the length (including the NUL) to at most errbuf_size
     bytes.  If the whole message won't fit, as much of it as will fit before
     the terminating NUL is supplied.  In any case, the returned value is the
     size of buffer needed to hold the whole message (including terminating
     NUL).  If errbuf_size is 0, errbuf is ignored but the return value is
     still correct.

     If the errcode given to regerror() is first ORed with REG_ITOA, the
     ``message'' that results is the printable name of the error code, e.g.
     ``REG_NOMATCH'', rather than an explanation thereof.  If errcode is
     REG_ATOI, then preg shall be non-NULL and the re_endp member of the
     structure it points to must point to the printable name of an error code;
     in this case, the result in errbuf is the decimal digits of the numeric
     value of the error code (0 if the name is not recognized).  REG_ITOA and
     REG_ATOI are intended primarily as debugging facilities; they are
     extensions, compatible with but not specified by IEEE Std 1003.2-1992
     ("POSIX.2"), and should be used with caution in software intended to be
     portable to other systems.  Be warned also that they are considered
     experimental and changes are possible.

     regfree() frees any dynamically-allocated storage associated with the
     compiled RE pointed to by preg.  The remaining regex_t is no longer a
     valid compiled RE and the effect of supplying it to regexec() or
     regerror() is undefined.

     None of these functions references global variables except for tables of
     constants; all are safe for use from multiple threads if the arguments
     are safe.

IMPLEMENTATION CHOICES
     There are a number of decisions that IEEE Std 1003.2-1992 ("POSIX.2")
     leaves up to the implementor, either by explicitly saying ``undefined''
     or by virtue of them being forbidden by the RE grammar.  This
     implementation treats them as follows.

     See re_format(7) for a discussion of the definition of case-independent
     matching.

     There is no particular limit on the length of REs, except insofar as
     memory is limited.  Memory usage is approximately linear in RE size, and
     largely insensitive to RE complexity, except for bounded repetitions.
     See BUGS for one short RE using them that will run almost any system out
     of memory.

     A backslashed character other than one specifically given a magic meaning
     by IEEE Std 1003.2-1992 ("POSIX.2") (such magic meanings occur only in
     obsolete [``basic''] REs) is taken as an ordinary character.

     Any unmatched [ is a REG_EBRACK error.

     Equivalence classes cannot begin or end bracket-expression ranges.  The
     endpoint of one range cannot begin another.

     RE_DUP_MAX, the limit on repetition counts in bounded repetitions, is
     255.

     A repetition operator (?, *, +, or bounds) cannot follow another
     repetition operator.  A repetition operator cannot begin an expression or
     subexpression or follow `^' or `|'.

     `|' cannot appear first or last in a (sub)expression or after another
     `|', i.e. an operand of `|' cannot be an empty subexpression.  An empty
     parenthesized subexpression, `()', is legal and matches an empty
     (sub)string.  An empty string is not a legal RE.

     A `{' followed by a digit is considered the beginning of bounds for a
     bounded repetition, which must then follow the syntax for bounds.  A `{'
     not followed by a digit is considered an ordinary character.

     `^' and `$' beginning and ending subexpressions in obsolete (``basic'')
     REs are anchors, not ordinary characters.

DIAGNOSTICS
     Non-zero error codes from regcomp() and regexec() include the following:

     REG_NOMATCH      regexec() failed to match
     REG_BADPAT       invalid regular expression
     REG_ECOLLATE     invalid collating element
     REG_ECTYPE       invalid character class
     REG_EESCAPE      \ applied to unescapable character
     REG_ESUBREG      invalid backreference number
     REG_EBRACK       brackets [ ] not balanced
     REG_EPAREN       parentheses ( ) not balanced
     REG_EBRACE       braces { } not balanced
     REG_BADBR        invalid repetition count(s) in { }
     REG_ERANGE       invalid character range in [ ]
     REG_ESPACE       ran out of memory
     REG_BADRPT       ?, *, or + operand invalid
     REG_EMPTY        empty (sub)expression
     REG_ASSERT       ``can't happen''--you found a bug
     REG_INVARG       invalid argument, e.g. negative-length string

SEE ALSO
     grep(1), sed(1), re_format(7)

     IEEE Std 1003.2-1992 ("POSIX.2"), sections 2.8 (Regular Expression
     Notation) and B.5 (C Binding for Regular Expression Matching).

HISTORY
     Originally written by Henry Spencer.  Altered for inclusion in the 4.4BSD
     distribution.

BUGS
     There is one known functionality bug.  The implementation of
     internationalization is incomplete: the locale is always assumed to be
     the default one of IEEE Std 1003.2-1992 ("POSIX.2"), and only the
     collating elements etc. of that locale are available.

     The back-reference code is subtle and doubts linger about its correctness
     in complex cases.

     regexec() performance is poor.  This will improve with later releases.
     nmatch exceeding 0 is expensive; nmatch exceeding 1 is worse.  regexec is
     largely insensitive to RE complexity except that back references are
     massively expensive.  RE length does matter; in particular, there is a
     strong speed bonus for keeping RE length under about 30 characters, with
     most special characters counting roughly double.

     regcomp() implements bounded repetitions by macro expansion, which is
     costly in time and space if counts are large or bounded repetitions are
     nested.  An RE like, say, `((((a{1,100}){1,100}){1,100}){1,100}){1,100}'
     will (eventually) run almost any existing machine out of swap space.

     There are suspected problems with response to obscure error conditions.
     Notably, certain kinds of internal overflow, produced only by truly
     enormous REs or by multiply nested bounded repetitions, are probably not
     handled well.

     Due to a mistake in IEEE Std 1003.2-1992 ("POSIX.2"), things like `a)b'
     are legal REs because `)' is a special character only in the presence of
     a previous unmatched `('.  This can't be fixed until the spec is fixed.

     The standard's definition of back references is vague.  For example, does
     `a\(\(b\)*\2\)*d' match `abbbd'?  Until the standard is clarified,
     behavior in such cases should not be relied on.

     The implementation of word-boundary matching is a bit of a kludge, and
     bugs may lurk in combinations of word-boundary matching and anchoring.

BSD                            December 29, 2003                           BSD

NAME | LIBRARY | SYNOPSIS | DESCRIPTION | IMPLEMENTATION CHOICES | DIAGNOSTICS | SEE ALSO | HISTORY | BUGS