Minix Man Pages

Man Page or Keyword Search:
Man Architecture
Apropos Keyword Search (all sections) Output format
home | help
PRINTF(1)                 BSD General Commands Manual                PRINTF(1)

     printf -- formatted output

     printf format [arguments ...]

     printf formats and prints its arguments, after the first, under control
     of the format.  The format is a character string which contains three
     types of objects: plain characters, which are simply copied to standard
     output, character escape sequences which are converted and copied to the
     standard output, and format specifications, each of which causes printing
     of the next successive argument.

     The arguments after the first are treated as strings if the corresponding
     format is either b, B, c, or s; otherwise it is evaluated as a C
     constant, with the following extensions:

           +o   A leading plus or minus sign is allowed.
           +o   If the leading character is a single or double quote, the value
               is the ASCII code of the next character.

     The format string is reused as often as necessary to satisfy the
     arguments.  Any extra format specifications are evaluated with zero or
     the null string.

     Character escape sequences are in backslash notation as defined in ANSI
     X3.159-1989 ("ANSI C89").  The characters and their meanings are as

           \e      Write an <escape> character.

           \a      Write a <bell> character.

           \b      Write a <backspace> character.

           \f      Write a <form-feed> character.

           \n      Write a <new-line> character.

           \r      Write a <carriage return> character.

           \t      Write a <tab> character.

           \v      Write a <vertical tab> character.

           \'      Write a <single quote> character.

           \"      Write a <double quote> character.

           \\      Write a backslash character.

           \num    Write an 8-bit character whose ASCII value is the 1-, 2-,
                   or 3-digit octal number num.

           \xxx    Write an 8-bit character whose ASCII value is the 1- or
                   2-digit hexadecimal number xx.

     Each format specification is introduced by the percent character ("%").
     The remainder of the format specification includes, in the following

     Zero or more of the following flags:

             #       A '#' character specifying that the value should be
                     printed in an "alternative form".  For b, c, d, and s
                     formats, this option has no effect.  For the o format the
                     precision of the number is increased to force the first
                     character of the output string to a zero.  For the x (X)
                     format, a non-zero result has the string 0x (0X)
                     prepended to it.  For e, E, f, g, and G formats, the
                     result will always contain a decimal point, even if no
                     digits follow the point (normally, a decimal point only
                     appears in the results of those formats if a digit
                     follows the decimal point).  For g and G formats,
                     trailing zeros are not removed from the result as they
                     would otherwise be.

             -       A minus sign '-' which specifies left adjustment of the
                     output in the indicated field;

             +       A '+' character specifying that there should always be a
                     sign placed before the number when using signed formats.

             ' '     A space specifying that a blank should be left before a
                     positive number for a signed format.  A '+' overrides a
                     space if both are used;

             0       A zero `0' character indicating that zero-padding should
                     be used rather than blank-padding.  A '-' overrides a '0'
                     if both are used;

     Field Width:
             An optional digit string specifying a field width; if the output
             string has fewer characters than the field width it will be
             blank-padded on the left (or right, if the left-adjustment
             indicator has been given) to make up the field width (note that a
             leading zero is a flag, but an embedded zero is part of a field

             An optional period, '.', followed by an optional digit string
             giving a precision which specifies the number of digits to appear
             after the decimal point, for e and f formats, or the maximum
             number of characters to be printed from a string (b, B, and s
             formats); if the digit string is missing, the precision is
             treated as zero;

             A character which indicates the type of format to use (one of

     A field width or precision may be '*' instead of a digit string.  In this
     case an argument supplies the field width or precision.

     The format characters and their meanings are:

     diouXx      The argument is printed as a signed decimal (d or i),
                 unsigned octal, unsigned decimal, or unsigned hexadecimal (X
                 or x), respectively.

     f           The argument is printed in the style [-]ddd.ddd where the
                 number of d's after the decimal point is equal to the
                 precision specification for the argument.  If the precision
                 is missing, 6 digits are given; if the precision is
                 explicitly 0, no digits and no decimal point are printed.

     eE          The argument is printed in the style [-]d.ddde+-dd where
                 there is one digit before the decimal point and the number
                 after is equal to the precision specification for the
                 argument; when the precision is missing, 6 digits are
                 produced.  An upper-case E is used for an 'E' format.

     gG          The argument is printed in style f or in style e (E)
                 whichever gives full precision in minimum space.

     b           Characters from the string argument are printed with
                 backslash-escape sequences expanded.

                 The following additional backslash-escape sequences are

                 \c      Causes printf to ignore any remaining characters in
                         the string operand containing it, any remaining
                         string operands, and any additional characters in the
                         format operand.

                 \0num   Write an 8-bit character whose ASCII value is the 1-,
                         2-, or 3-digit octal number num.

                 \^c     Write the control character c.  Generates characters
                         `\000' through `\037`, and `\177' (from `\^?').

                 \M-c    Write the character c with the 8th bit set.
                         Generates characters `\241' through `\376`.

                 \M^c    Write the control character c with the 8th bit set.
                         Generates characters `\200' through `\237`, and
                         `\377' (from `\M^?').

     B           Characters from the string argument are printed with
                 unprintable characters backslash-escaped using the
                 `\c',`\^c',`\M-c'or `\M^c', formats described above.

     c           The first character of argument is printed.

     s           Characters from the string argument are printed until the end
                 is reached or until the number of characters indicated by the
                 precision specification is reached; if the precision is
                 omitted, all characters in the string are printed.

     %           Print a `%'; no argument is used.

     In no case does a non-existent or small field width cause truncation of a
     field; padding takes place only if the specified field width exceeds the
     actual width.

     printf exits 0 on success, 1 on failure.

     echo(1), printf(3), vis(3), printf(9)

     The printf utility conforms to IEEE Std 1003.1-2001 ("POSIX.1").

     Support for the floating point formats and `*' as a field width and
     precision are optional in POSIX.

     The behaviour of the %B format and the \', \", \xxx, \e and \[M][-|^]c
     escape sequences are undefined in POSIX.

     Since the floating point numbers are translated from ASCII to floating-
     point and then back again, floating-point precision may be lost.

     Hexadecimal character constants are restricted to, and should be
     specified as, two character constants.  This is contrary to the ISO C
     standard but does guarantee detection of the end of the constant.

     All formats which treat the argument as a number first convert the
     argument from its external representation as a character string to an
     internal numeric representation, and then apply the format to the
     internal numeric representation, producing another external character
     string representation.  One might expect the %c format to do likewise,
     but in fact it does not.

     To convert a string representation of a decimal, octal, or hexadecimal
     number into the corresponding character, two nested printf invocations
     may be used, in which the inner invocation converts the input to an octal
     string, and the outer invocation uses the octal string as part of a
     format.  For example, the following command outputs the character whose
     code is 0x0A, which is a newline in ASCII:

           printf "$(printf "\\%o" "0x0A")"

BSD                               May 6, 2008                              BSD