Minix Man Pages
home | help- add_rout(8), add_route(8)
- configure IP routing
- adduser(8)
- add a new user to the system
- backup(8)
- backup files
- badblock(8), badblocks(8)
- put a list of bad blocks in a file
- boot(8)
- from power on to the login prompt
- checkhie(8), checkhier(8)
- check the directory hierarchy
- chown(8)
- change owner
- cron(8)
- clock daemon
- elvprsv(8)
- Preserve the the modified version of a file after a crash
- fdisk(8)
- partition a hard disk [IBM]
- fingerd(8), in.fingerd(8)
- remote user information server
- ftpd(8), in.ftpd(8), setup.anonftp(8)
- DARPA Internet File Transfer Protocol server
- getty(8)
- system login banner
- halt(8)
- abruptly stop the system
- ifconfig(8)
- configure a TCP/IP device
- inet(8)
- TCP/IP server
- init(8)
- grandparent of all processes
- inodes(8)
- print i-node information
- installb(8), installboot(8)
- make a device bootable
- irdpd(8)
- internet router discovery protocol daemon
- makedev(8), MAKEDEV(8), DESCRIBE(8)
- make/describe device files
- mkdist(8)
- make a Minix distribution
- mknod(8)
- create a special file
- monitor(8), edparams(8)
- load and start Minix, modify boot parameters
- ncheck(8)
- i-node to name converter
- nonamed(8)
- not a name daemon, but acts like one
- part(8)
- partition table editor
- partitio(8), partition(8)
- make a partition table
- pr_route(8), pr_routes(8)
- show IP routing
- printroo(8), printroot(8)
- print the name of the root device on standard output
- pwdauth(8)
- password authentication program
- rarpd(8)
- reverse address resolution protocol daemon
- readcloc(8), readclock(8)
- read the real time clock [IBM PC/AT and AMIGA]
- reboot(8)
- reboot the system immediately
- repartit(8), repartition(8)
- load a partition table
- rlogind(8), in.rld(8)
- remote login server
- rshd(8)
- remote shell server
- s_n_d(8), set_net_default(8)
- select the default TCP/IP network
- screendu(8), screendump(8)
- write current console screen to standard output
- shutdown(8)
- graciously close the system down
- srccrc(8)
- compute CRC checksums of the entire source tree
- sync(8)
- flush the cache to disk
- update(8)
- periodically write the buffer cache to disk
- usage(8)
- installing and using Minix