Minix Man Pages

home | help

busybox (1): The Swiss Army Knife of Embedded Linux
Dpkg (3perl): module with core variables
Error (3pm): Error/exception handling in an OO-ish way
_newselect (2): synchronous I/O multiplexing
UPower (7): System-wide Power Management
wget (1): The non-interactive network downloader.
__fwritable (3): interfaces to stdio FILE structure
__fwriting (3): interfaces to stdio FILE structure
__ppc_set_ppr_low (3): Set the Program Priority Register
__ppc_set_ppr_med_low (3): Set the Program Priority Register
__ppc_set_ppr_very_low (3): Set the Program Priority Register
__setfpucw (3): set FPU control word on i386 architecture (obsolete)
_llseek (2): reposition read/write file offset
_syscall (2): invoking a system call without library support (OBSOLETE)
_sysctl (2): read/write system parameters
a64l (3): convert between long and base-64
aa-enabled (1): test whether AppArmor is enabled
aa-exec (1): confine a program with the specified AppArmor profile
aa-remove-unknown (8): remove unknown AppArmor profiles
aa-teardown (8): unload all AppArmor profiles
acct (2): switch process accounting on or off
addseverity (3): introduce new severity classes
adjtime_config (5): information about hardware clock setting and drift factor
aio (7): POSIX asynchronous I/O overview
aio_suspend (3): wait for asynchronous I/O operation or timeout
aio_write (3): asynchronous write
Algorithm::Diff (3pm): Compute `intelligent' differences between two files /...
Algorithm::Diff::XS (3pm): Algorithm::Diff with XS core loop
Algorithm::DiffOld (3pm): Compute `intelligent' differences between two file...
Algorithm::Merge (3pm): Three-way merge and diff
apt-mark (8): show, set and unset various settings for a package
apt-transport-http (1): APT transport for downloading via the Hypertext Tran...
apt-transport-https (1): APT transport for downloading via the HTTP Secure p...
arch (1): print machine hardware name (same as uname -m)
arm_sync_file_range (2): sync a file segment with disk
asctime (3): transform date and time to broken-down time or ASCII
asctime_r (3): transform date and time to broken-down time or ASCII
at.allow (5): determine who can submit jobs via at or batch
at.deny (5): determine who can submit jobs via at or batch
atan2 (3): arc tangent function of two variables
atan2f (3): arc tangent function of two variables
atan2l (3): arc tangent function of two variables
Authen::SASL (3pm): SASL Authentication framework
awk (1): pattern scanning and processing language
bcache-super-show (8): Print the bcache superblock
be16toh (3): convert values between host and big-/little-endian byt...
be32toh (3): convert values between host and big-/little-endian byt...
be64toh (3): convert values between host and big-/little-endian byt...
bootctl (1): Control the firmware and boot manager settings
bridge (8): show / manipulate bridge addresses and devices
bsd-from (1): print names of those who have sent mail
bsd-write (1): send a message to another user
bsd_signal (3): signal handling with BSD semantics
bswap (3): reverse order of bytes
bswap_16 (3): reverse order of bytes
bswap_32 (3): reverse order of bytes
bswap_64 (3): reverse order of bytes
btowc (3): convert single byte to wide character
btrfs-filesystem (8): command group that primarily does work on the whole fi...
btrfs-replace (8): replace devices managed by btrfs with other device.
btrfs-select-super (8): overwrite primary superblock with a backup copy
btrfs-send (8): generate a stream of changes between two subvolume sna...
byobu (1): wrapper script for seeding a user's byobu configuratio...
byobu-disable (1): wrapper script for enabling/disabling automatic startu...
byobu-enable (1): wrapper script for enabling/disabling automatic startu...
byobu-screen (1): Launch byobu with screen as the backend
byobu-select-backend (1): select your default Byobu backend window manager
byobu-status-detail (1): Wrapper that uses a sensible pager
byobu-tmux (1): Launch byobu with tmux as the backend
byteorder (3): convert values between host and network byte order
bzless (1): file perusal filter for crt viewing of bzip2 compresse...
bzmore (1): file perusal filter for crt viewing of bzip2 compresse...
cache_writeback (8): writeback dirty blocks to the origin device.
capabilities (7): overview of Linux capabilities
capsh (1): capability shell wrapper
cfmakeraw (3): get and set terminal attributes, line control, get and...
CGI (3pm): Handle Common Gateway Interface requests and responses
CGI::Carp (3pm): CGI routines for writing to the HTTPD (or other) error...
CGI::Session::Serialize::freezethaw (3pm): serializer for CGI::Session
cgroup_namespaces (7): overview of Linux cgroup namespaces
chage (1): change user password expiry information
chdir (2): change working directory
chgpasswd (8): update group passwords in batch mode
chgrp (1): change group ownership
chown (1): change file owner and group
chown (2): change ownership of a file
chown32 (2): change ownership of a file
chpasswd (8): update passwords in batch mode
chroot (8): run command or interactive shell with special root dir...
clntraw_create (3): library routines for remote procedure calls
clock_nanosleep (2): high-resolution sleep with specifiable clock
cloud-init-per (1): Run a command with arguments at a specific frequency
cmp (1): (unknown subject)
col1 (1): awk and print a column (based on the name of the progr...
col2 (1): awk and print a column (based on the name of the progr...
col3 (1): awk and print a column (based on the name of the progr...
col4 (1): awk and print a column (based on the name of the progr...
col5 (1): awk and print a column (based on the name of the progr...
col6 (1): awk and print a column (based on the name of the progr...
col7 (1): awk and print a column (based on the name of the progr...
col8 (1): awk and print a column (based on the name of the progr...
col9 (1): awk and print a column (based on the name of the progr...
colcrt (1): filter nroff output for CRT previewing
comm (1): compare two sorted files line by line
cpan (1): easily interact with CPAN from the command line
cpan5.30-x86_64-linux-gnu (1): easily interact with CPAN from the command line
cpgr (8): copy with locking the given file to the password or gr...
cpow (3): complex power function
cpowf (3): complex power function
cpowl (3): complex power function
cppw (8): copy with locking the given file to the password or gr...
crda (8): send to the kernel a wireless regulatory domain for a ...
cryptdisks_start (8): wrapper around cryptsetup that parses /etc/crypttab.
cryptdisks_stop (8): wrapper around cryptsetup that parses /etc/crypttab.
ctail (1): watch and colorize a logfile
ctime (3): transform date and time to broken-down time or ASCII
ctime_r (3): transform date and time to broken-down time or ASCII
ctstat (8): unified linux network statistics
cvtsudoers (1): convert between sudoers file formats
daemon (7): Writing and packaging system daemons
Data::Dump::Filtered (3pm): Pretty printing with filtering
DBD::File (3pm): Base class for writing file based DBI drivers
DBD::File::HowTo (3pm): Guide to create DBD::File based driver
DBD::Gofer (3pm): A stateless-proxy driver for communicating with a remo...
DBI::DBD (3pm): Perl DBI Database Driver Writer's Guide
DBI::DBD::SqlEngine (3pm): Base class for DBI drivers without their own SQL ...
DBI::DBD::SqlEngine::HowTo (3pm): Guide to create DBI::DBD::SqlEngine based ...
DBI::W32ODBC (3pm): An experimental DBI emulation layer for Win32::ODBC
dbus-run-session (1): start a process as a new D-Bus session
dconf-service (1): D-Bus service for writes to the dconf database
deb-systemd-invoke (1p): wrapper around systemctl, respecting policy-rc.d
debconf-communicate (1): communicate with debconf
debconf-escape (1): helper when working with debconf's escape capability
debconf-set-selections (1): insert new values into the debconf database
debconf-show (1): query the debconf database
defined (3): a library for working with MaxMind DB files
dhclient-script (8): DHCP client network configuration script
splain (1): produce verbose warning diagnostics
diff (1): (unknown subject)
diff3 (1): (unknown subject)
dl_iterate_phdr (3): walk through list of shared objects
dmmp_context_new (3): Create struct dmmp_context.
dmmp_mpath_wwid_get (3): Retrieve WWID of certain mpath.
dmsetup (8): low level logical volume management
dnsblog (8postfix): Postfix DNS white/blacklist logger
dnsdomainname (1): show the system's DNS domain name
domainname (1): show or set the system's NIS/YP domain name
dpkg-maintscript-helper (1): works around known dpkg limitations in maintain...
dpkg-mergechangelogs (1): 3-way merge of debian/changelog files
dpkg-statoverride (1): override ownership and mode of files
Dpkg::Compression::FileHandle (3perl): object dealing transparently with fil...
Dpkg::Deps::KnownFacts (3perl): list of installed real and virtual packages
Dpkg::Gettext (3perl): convenience wrapper around Locale::gettext
dwp (1): The DWARF packaging utility
tc-ematch (8): extended matches for use with "basic", "cgroup" or "fl...
endhostent (3): get network host entry
endian (3): convert values between host and big-/little-endian byt...
endnetent (3): get network entry
endnetgrent (3): handle network group entries
endpwent (3): get password file entry
endspent (3): get shadow password file entry
epoll_pwait (2): wait for an I/O event on an epoll file descriptor
epoll_wait (2): wait for an I/O event on an epoll file descriptor
ethtool (8): query or control network driver and hardware settings
eventfd_write (3): create a file descriptor for event notification
expiry (1): check and enforce password expiration policy
faked (1): daemon that remembers fake ownership/permissions of fi...
faked-sysv (1): daemon that remembers fake ownership/permissions of fi...
faked-tcp (1): daemon that remembers fake ownership/permissions of fi...
fchdir (2): change working directory
fchown (2): change ownership of a file
fchown32 (2): change ownership of a file
fchownat (2): change ownership of a file
fdatasync (2): synchronize a file's in-core state with storage device
fdformat (8): low-level format a floppy disk
ffs (3): find first bit set in a word
ffsl (3): find first bit set in a word
ffsll (3): find first bit set in a word
fgetpwent (3): get password file entry
fgetpwent_r (3): get passwd file entry reentrantly
fgetspent (3): get shadow password file entry
fgetspent_r (3): get shadow password file entry
fgetwc (3): read a wide character from a FILE stream
fgetwc_unlocked (3): nonlocking stdio functions
fgetws (3): read a wide-character string from a FILE stream
fgetws_unlocked (3): nonlocking stdio functions
file-hierarchy (7): File system hierarchy overview
File::FcntlLock (3pm): File locking with fcntl(2)
File::FcntlLock::Inline (3pm): File locking with fcntl(2)
File::FcntlLock::Pure (3pm): File locking with fcntl(2)
File::FcntlLock::XS (3pm): File locking with fcntl(2)
filefuncs (3am): provide some file related functionality to gawk
filter-a (8): filter A in DNS responses when AAAA is present
filter-aaaa (8): filter AAAA in DNS responses when A is present
finalrd (1): final runtime directory generator for shutdown
tc-flow (8): flow based traffic control filter
tc-flower (8): flow based traffic control filter
fmax (3): determine maximum of two floating-point numbers
fmaxf (3): determine maximum of two floating-point numbers
fmaxl (3): determine maximum of two floating-point numbers
fmin (3): determine minimum of two floating-point numbers
fminf (3): determine minimum of two floating-point numbers
fminl (3): determine minimum of two floating-point numbers
fnmatch (3am): compare a string against a filename wildcard
fold (1): wrap each input line to fit in specified width
fputwc (3): write a wide character to a FILE stream
fputwc_unlocked (3): nonlocking stdio functions
fputws (3): write a wide-character string to a FILE stream
fputws_unlocked (3): nonlocking stdio functions
freeaddrinfo (3): network address and service translation
freehostent (3): get network hostnames and addresses
FreezeThaw (3pm): converting Perl structures to strings and back.
from (1): print names of those who have sent mail
fsf-funding (7gcc): Funding Free Software
fstab-decode (8): run a command with fstab-encoded arguments
fsync (2): synchronize a file's in-core state with storage device
ftw (3): file tree walk
full (4): always full device
utimensat (2): change file timestamps with nanosecond precision
futimens (3): change file timestamps with nanosecond precision
tc-fw (8): fwmark traffic control filter
fwide (3): set and determine the orientation of a FILE stream
fwprintf (3): formatted wide-character output conversion
fwrite (3): binary stream input/output
fwrite_unlocked (3): nonlocking stdio functions
fwupdagent (1): Firmware updating agent
fwupdate (1): Debugging utility for UEFI firmware updates
fwupdmgr (1): Firmware update manager client utility
fwupdtool (1): Standalone firmware update utility
fwupdtpmevlog (1): Debugging utility for the TPM event log
gai_cancel (3): asynchronous network address and service translation
gai_error (3): asynchronous network address and service translation
gai_strerror (3): network address and service translation
gai_suspend (3): asynchronous network address and service translation
gawk (1): pattern scanning and processing language
gcc-ar (1): a wrapper around ar adding the --plugin option
gcc-ar-9 (1): a wrapper around ar adding the --plugin option
gcc-nm (1): a wrapper around nm adding the --plugin option
gcc-nm-9 (1): a wrapper around nm adding the --plugin option
gcc-ranlib (1): a wrapper around ranlib adding the --plugin option
gcc-ranlib-9 (1): a wrapper around ranlib adding the --plugin option
gdbus (1): Tool for working with D-Bus objects
get-iab (1): Fetch the arp-scan IAB file from the IEEE website
get-oui (1): Fetch the arp-scan OUI file from the IEEE website (on ...
getcwd (2): get current working directory
get_current_dir_name (3): get current working directory
getaddrinfo (3): network address and service translation
getaddrinfo_a (3): asynchronous network address and service translation
getcpu (2): determine CPU and NUMA node on which the calling threa...
getcwd (3): get current working directory
getdate (3): convert a date-plus-time string to broken-down time
getdate_err (3): convert a date-plus-time string to broken-down time
getdate_r (3): convert a date-plus-time string to broken-down time
getent (1): get entries from Name Service Switch libraries
getentropy (3): fill a buffer with random bytes
getgrouplist (3): get list of groups to which a user belongs
gethostbyaddr (3): get network host entry
gethostbyaddr_r (3): get network host entry
gethostbyname (3): get network host entry
gethostbyname2 (3): get network host entry
gethostbyname2_r (3): get network host entry
gethostbyname_r (3): get network host entry
gethostent (3): get network host entry
gethostent_r (3): get network host entry
getipnodebyaddr (3): get network hostnames and addresses
getipnodebyname (3): get network hostnames and addresses
getnetbyaddr (3): get network entry
getnetbyaddr_r (3): get network entry (reentrant)
getnetbyname (3): get network entry
getnetbyname_r (3): get network entry (reentrant)
getnetent (3): get network entry
getnetent_r (3): get network entry (reentrant)
getnetgrent (3): handle network group entries
getnetgrent_r (3): handle network group entries
getpass (3): get a password
getpw (3): reconstruct password line entry
getpwent (3): get password file entry
getpwent_r (3): get passwd file entry reentrantly
getpwnam (3): get password file entry
getpwnam_r (3): get password file entry
getpwuid (3): get password file entry
getpwuid_r (3): get password file entry
getspent (3): get shadow password file entry
getspent_r (3): get shadow password file entry
getspnam (3): get shadow password file entry
getspnam_r (3): get shadow password file entry
getunwind (2): copy the unwind data to caller's buffer
getw (3): input and output of words (ints)
getwc (3): read a wide character from a FILE stream
getwc_unlocked (3): nonlocking stdio functions
getwchar (3): read a wide character from standard input
getwchar_unlocked (3): nonlocking stdio functions
getwd (3): get current working directory
git-annotate (1): Annotate file lines with commit information
git-blame (1): Show what revision and author last modified each line ...
git-check-mailmap (1): Show canonical names and email addresses of contacts
git-check-ref-format (1): Ensures that a reference name is well formed
git-checkout (1): Switch branches or restore working tree files
git-checkout-index (1): Copy files from the index to the working tree
git-clean (1): Remove untracked files from the working tree
git-clone (1): Clone a repository into a new directory
git-commit-graph (1): Write and verify Git commit-graph files
git-commit-tree (1): Create a new commit object
git-credential-cache (1): Helper to temporarily store passwords in memory
git-diff (1): Show changes between commits, commit and working tree,...
git-diff-files (1): Compares files in the working tree and the index
git-diff-index (1): Compare a tree to the working tree or index
git-diff-tree (1): Compares the content and mode of blobs found via two t...
git-difftool (1): Show changes using common diff tools
git-fetch (1): Download objects and refs from another repository
git-filter-branch (1): Rewrite branches
git-http-fetch (1): Download from a remote Git repository via HTTP
git-instaweb (1): Instantly browse your working repository in gitweb
git-log (1): Show commit logs
git-ls-files (1): Show information about files in the index and the work...
git-merge (1): Join two or more development histories together
git-merge-file (1): Run a three-way file merge
git-merge-one-file (1): The standard helper program to use with git-merge-index
git-merge-tree (1): Show three-way merge without touching index
git-multi-pack-index (1): Write and verify multi-pack-indexes
git-pull (1): Fetch from and integrate with another repository or a ...
git-push (1): Update remote refs along with associated objects
git-range-diff (1): Compare two commit ranges (e.g. two versions of a branch)
git-receive-pack (1): Receive what is pushed into the repository
git-restore (1): Restore working tree files
git-rm (1): Remove files from the working tree and from the index
git-sh-i18n--envsubst (1): Git's own envsubst(1) for i18n fallbacks
git-show (1): Show various types of objects
git-show-branch (1): Show branches and their commits
git-show-index (1): Show packed archive index
git-show-ref (1): List references in a local repository
git-stash (1): Stash the changes in a dirty working directory away
git-status (1): Show the working tree status
git-stripspace (1): Remove unnecessary whitespace
git-switch (1): Switch branches
git-tag (1): Create, list, delete or verify a tag object signed wit...
git-unpack-file (1): Creates a temporary file with a blob's contents
git-update-index (1): Register file contents in the working tree to the index
git-var (1): Show a Git logical variable
git-web--browse (1): Git helper script to launch a web browser
git-whatchanged (1): Show logs with difference each commit introduces
git-worktree (1): Manage multiple working trees
git-write-tree (1): Create a tree object from the current index
gitcredentials (7): providing usernames and passwords to Git
gitdiffcore (7): Tweaking diff output
gitremote-helpers (7): Helper programs to interact with remote repositories
gittutorial-2 (7): A tutorial introduction to Git: part two
gitweb (1): Git web interface (web frontend to Git repositories)
gitweb.conf (5): Gitweb (Git web interface) configuration file
gitworkflows (7): An overview of recommended workflows with Git
glibc (7): overview of standard C libraries on Linux
gmtime (3): transform date and time to broken-down time or ASCII
gmtime_r (3): transform date and time to broken-down time or ASCII
gpasswd (1): administer /etc/group and /etc/gshadow
gpg-connect-agent (1): Communicate with a running agent
gpg-wks-client (1): Client for the Web Key Service
gpg-wks-server (1): Server providing the Web Key Service
grog (1): guess options for a following groff command
grotty (1): groff driver for typewriter-like devices
group_member (3): test whether a process is in a group
groupadd (8): create a new group
growpart (1): extend a partition in a partition table to fill availa...
grpconv (8): convert to and from shadow passwords and groups
grpunconv (8): convert to and from shadow passwords and groups
grub-mkpasswd-pbkdf2 (1): generate hashed password for GRUB
grub-mount (1): export GRUB filesystem with FUSE
gshadow (5): shadowed group file
gsignal (3): software signal facility
h_errno (3): get network host entry
halt (8): Halt, power-off or reboot the machine
herror (3): get network host entry
hostname (1): show or set the system's host name
hosts.allow (5): format of host access control files
hstrerror (3): get network host entry
htdbm (1): Manipulate DBM password databases
HTML::Entities (3pm): Encode or decode strings with HTML entities
HTML::FormatMarkdown (3pm): Format HTML as Markdown
HTML::Parse (3pm): Deprecated, a wrapper around HTML::TreeBuilder
HTML::Tree::AboutObjects (3pm): - article: "User's View of Object-Oriented M...
htobe16 (3): convert values between host and big-/little-endian byt...
htobe32 (3): convert values between host and big-/little-endian byt...
htobe64 (3): convert values between host and big-/little-endian byt...
htole16 (3): convert values between host and big-/little-endian byt...
htole32 (3): convert values between host and big-/little-endian byt...
htole64 (3): convert values between host and big-/little-endian byt...
htonl (3): convert values between host and network byte order
htons (3): convert values between host and network byte order
htop (1): interactive process viewer
htpasswd (1): Manage user files for basic authentication
httxt2dbm (1): Generate dbm files for use with RewriteMap
hwclock (5): variables that affect the behaviour of the hwclock boo...
hwclock (8): time clocks utility
hwdb (7): Hardware Database
i386 (8): change reported architecture in new program environmen...
if_freenameindex (3): get network interface names and indexes
if_indextoname (3): mappings between network interface names and indexes
if_nameindex (3): get network interface names and indexes
if_nametoindex (3): mappings between network interface names and indexes
ifcfg (8): simplistic script which replaces ifconfig IP management
ifconfig (8): configure a network interface
inet_net_ntop (3): Internet network number conversion
inet_net_pton (3): Internet network number conversion
inet_network (3): Internet address manipulation routines
infobrowser (1): read Info documents
initramfs-tools (7): an introduction to writing scripts for mkinitramfs
innetgr (3): handle network group entries
inotify_add_watch (2): add a watch to an initialized inotify instance
inotify_rm_watch (2): remove an existing watch from an inotify instance
installkernel (8): install a new kernel image
insw (2): port I/O
intro (7): introduction to overview and miscellany section
inw (2): port I/O
inw_p (2): port I/O
IO::HTML (3pm): Open an HTML file with automatic charset detection
IO::Socket::SSL (3pm): SSL sockets with IO::Socket interface
ioctl_ficlone (2): share some the data of one file with another file
ioctl_ficlonerange (2): share some the data of one file with another file
ioctl_fideduperange (2): share some the data of one file with another file
ip (8): show / manipulate routing, network devices, interfaces...
ip-link (8): network device configuration
ip-netconf (8): network configuration monitoring
ip-netns (8): process network namespace management
ip6tables-apply (8): a safer way to update iptables remotely
ipc_namespaces (7): overview of Linux IPC namespaces
ipcs (1): show information on IPC facilities
iptables-apply (8): a safer way to update iptables remotely
irqbalance (1): distribute hardware interrupts across processors on a ...
isatty (3): test whether a file descriptor refers to a terminal
isgreater (3): floating-point relational tests without exception for NaN
isgreaterequal (3): floating-point relational tests without exception for NaN
isless (3): floating-point relational tests without exception for NaN
islessequal (3): floating-point relational tests without exception for NaN
islessgreater (3): floating-point relational tests without exception for NaN
islower (3): character classification functions
islower_l (3): character classification functions
isunordered (3): floating-point relational tests without exception for NaN
iswalnum (3): test for alphanumeric wide character
iswalpha (3): test for alphabetic wide character
iswblank (3): test for whitespace wide character
iswcntrl (3): test for control wide character
iswctype (3): wide-character classification
iswdigit (3): test for decimal digit wide character
iswgraph (3): test for graphic wide character
iswlower (3): test for lowercase wide character
iswprint (3): test for printing wide character
iswpunct (3): test for punctuation or symbolic wide character
iswspace (3): test for whitespace wide character
iswupper (3): test for uppercase wide character
iswxdigit (3): test for hexadecimal digit wide character
iw (8): show / manipulate wireless devices and their configura...
join (1): join lines of two files on a common field
kcmp (2): compare two processes to determine if they share a ker...
kexec_file_load (2): load a new kernel for later execution
kexec_load (2): load a new kernel for later execution
l64a (3): convert between long and base-64
last (1): show a listing of last logged in users
lastb (1): show a listing of last logged in users
lcf (1): Determine which of the historical versions of a config...
lchown (2): change ownership of a file
lchown32 (2): change ownership of a file
lckpwdf (3): get shadow password file entry
ldexp (3): multiply floating-point number by integral power of 2
ldexpf (3): multiply floating-point number by integral power of 2
ldexpl (3): multiply floating-point number by integral power of 2
le16toh (3): convert values between host and big-/little-endian byt...
le32toh (3): convert values between host and big-/little-endian byt...
le64toh (3): convert values between host and big-/little-endian byt...
libc (7): overview of standard C libraries on Linux
libguestlib (3): vmware shared library
libmaxminddb (3): a library for working with MaxMind DB files
libvmtools (3): vmware shared library
libwww::lwpcook (3pm): The libwww-perl cookbook
libwww::lwptut (3pm): - An LWP Tutorial
lighttpd (8): a fast, secure and flexible web server
link (2): make a new name for a file
linkat (2): make a new name for a file
linux-check-removal (1): check whether removal of a kernel is safe
linux32 (1): change reported architecture in new program environmen...
linux64 (1): change reported architecture in new program environmen...
llseek (2): reposition read/write file offset
ln (1): make links between files
lnstat (8): unified linux network statistics
localtime (3): transform date and time to broken-down time or ASCII
localtime_r (3): transform date and time to broken-down time or ASCII
login (3): write utmp and wtmp entries
login.defs (5): shadow password suite configuration
logout (3): write utmp and wtmp entries
logwtmp (3): append an entry to the wtmp file
look (1): display lines beginning with a given string
lowntfs-3g (8): Third Generation Read/Write NTFS Driver
lseek (2): reposition read/write file offset
lseek64 (3): reposition 64-bit read/write file offset
lshw (1): list hardware
lsipc (1): show information on IPC facilities currently employed ...
lslogins (1): display information about known users in the system
lsmem (1): list the ranges of available memory with their online ...
lsmod (8): Show the status of modules in the Linux Kernel
lspgpot (1): extracts the ownertrust values from PGP keyrings and l...
lvm-fullreport (8): (unknown subject)
lvm-lvpoll (8): (unknown subject)
LWP (3pm): The World-Wide Web library for Perl
lwp-download (1p): Fetch large files from the web
lwp-dump (1p): See what headers and content is returned for a URL
lwp-mirror (1p): Simple mirror utility
lwp-request (1p): Simple command line user agent
LWP::Authen::Ntlm (3pm): Library for enabling NTLM authentication (Microsoft...
LWP::ConnCache (3pm): Connection cache manager
LWP::Debug (3pm): deprecated
LWP::MediaTypes (3pm): guess media type for a file or a URL
LWP::MemberMixin (3pm): Member access mixin class
LWP::Protocol (3pm): Base class for LWP protocols
LWP::Protocol::https (3pm): Provide https support for LWP::UserAgent
LWP::RobotUA (3pm): a class for well-behaved Web robots
LWP::Simple (3pm): simple procedural interface to LWP
LWP::UserAgent (3pm): Web user agent class
lzless (1): view xz or lzma compressed (text) files
lzmainfo (1): show information stored in the .lzma file header
lzmore (1): view xz or lzma compressed (text) files
make-ssl-cert (8): Debconf wrapper for openssl
man-pages (7): conventions for writing Linux man pages
mawk (1): pattern scanning and text processing language
mbrtowc (3): convert a multibyte sequence to a wide character
mbsnrtowcs (3): convert a multibyte string to a wide-character string
mbsrtowcs (3): convert a multibyte string to a wide-character string
mbstowcs (3): convert a multibyte string to a wide-character string
mbtowc (3): convert a multibyte sequence to a wide character
md (4): Multiple Device driver aka Linux Software RAID
mdadm (8): manage MD devices aka Linux Software RAID
mdadm.conf (5): configuration for management of Software RAID with mdadm
memset (3): fill memory with a constant byte
mii-tool (8): view, manipulate media-independent interface status
mincore (2): determine whether pages are resident in memory
mkinitramfs (8): low-level tool for generating an initramfs image
mkswap (8): set up a Linux swap area
mktime (3): transform date and time to broken-down time or ASCII
modinfo (8): Show information about a Linux Kernel module
more (1): file perusal filter for crt viewing
mount.lowntfs-3g (8): Third Generation Read/Write NTFS Driver
mount.ntfs (8): Third Generation Read/Write NTFS Driver
mount.ntfs-3g (8): Third Generation Read/Write NTFS Driver
mount_namespaces (7): overview of Linux mount namespaces
mq_notify (2): register for notification when a message is available
mq_notify (3): register for notification when a message is available
mq_overview (7): overview of POSIX message queues
tc-mqprio (8): Multiqueue Priority Qdisc (Offloaded Hardware QOS)
msync (2): synchronize a file with a memory map
mtr (8): a network diagnostic tool
mtr-packet (8): send and receive network probes
namei (1): follow a pathname until a terminal point is found
nameif (8): name network interfaces based on MAC addresses
namespaces (7): overview of Linux namespaces
nawk (1): pattern scanning and processing language
Net::HTTP (3pm): Low-level HTTP connection (client)
Net::HTTPS (3pm): Low-level HTTP over SSL/TLS connection (client)
netdevice (7): low-level access to Linux network devices
tc-netem (8): Network Emulator
netlink (7): communication between kernel and user space (AF_NETLINK)
netplan (5): YAML network configuration abstraction for various bac...
netplan-set (8): write netplan YAML configuration snippets to file
netstat (8): Print network connections, routing tables, interface s...
network_namespaces (7): overview of Linux network namespaces
networkctl (1): Query the status of network links
networkd-dispatcher (8): Dispatcher service for systemd-networkd connection ...
networkd.conf (5): Global Network configuration files
networkd.conf.d (5): Global Network configuration files
networks (5): network name information
newaliases (1): Postfix to Sendmail compatibility interface
newfstatat (2): get file status
newgrp (1): log in to a new group
newlocale (3): create, modify, and free a locale object
newusers (8): update and create new users in batch
nextdown (3): return next floating-point number toward positive/nega...
nextdownf (3): return next floating-point number toward positive/nega...
nextdownl (3): return next floating-point number toward positive/nega...
nexttoward (3): floating-point number manipulation
nexttowardf (3): floating-point number manipulation
nexttowardl (3): floating-point number manipulation
nextup (3): return next floating-point number toward positive/nega...
nextupf (3): return next floating-point number toward positive/nega...
nextupl (3): return next floating-point number toward positive/nega...
NF (1): awk and print a column (based on the name of the progr...
nftw (3): file tree walk
nice (1): run a program with modified scheduling priority
nisdomainname (1): show or set the system's NIS/YP domain name
nohup (1): run a command immune to hangups, with output to a non-tty
nsenter (1): run program with namespaces of other processes
nss (5): Name Service Switch configuration file
nsswitch.conf (5): Name Service Switch configuration file
nstat (8): network statistics tools.
ntfs-3g (8): Third Generation Read/Write NTFS Driver
ntfscmp (8): compare two NTFS filesystems and tell the differences
ntfsfix (8): fix common errors and force Windows to check NTFS
ntfsprogs (8): tools for doing neat things with NTFS
ntfsrecover (8): Recover updates committed by Windows on an NTFS volume
ntfsresize (8): resize an NTFS filesystem without data loss
ntfswipe (8): overwrite unused space on an NTFS volume
ntohl (3): convert values between host and network byte order
ntohs (3): convert values between host and network byte order
numa (7): overview of Non-Uniform Memory Architecture
numa_maps (5): overview of Non-Uniform Memory Architecture
on_ac_power (1): test whether computer is running on AC power
open_wmemstream (3): open a dynamic memory buffer stream
openssl-passwd (1ssl): compute password hashes
openssl-srp (1ssl): maintain SRP password file
openvt (1): start a program on a new virtual terminal (VT).
outsw (2): port I/O
outw (2): port I/O
outw_p (2): port I/O
overlayroot-chroot (8): chroot into the lower filesystem in a writable mode
ownership (8): Compaq ownership tag retriever
pam_exec (8): PAM module which calls an external command
pam_listfile (8): deny or allow services based on an arbitrary file
pam_localuser (8): require users to be listed in /etc/passwd
pam_pwhistory (8): PAM module to remember last passwords
pam_sepermit (8): PAM module to allow/deny login depending on SELinux en...
pam_unix (8): Module for traditional password authentication
pam_warn (8): PAM module which logs all PAM items if called
pam_wheel (8): Only permit root access to members of group wheel
pam_xauth (8): PAM module to forward xauth keys between users
passphrase-encoding (7ssl): How diverse parts of OpenSSL treat pass phrases ...
passwd (1): change user password
passwd (1ssl): compute password hashes
passwd (5): the password file
passwd2des (3): RFS password encryption
path_resolution (7): how a pathname is resolved to a file
pathchk (1): check whether file names are valid or portable
pause (2): wait for signal
pciconfig_write (2): pci device information handling
perlbug (1): how to submit bug reports on Perl
perlthanks (1): how to submit bug reports on Perl
php-cgi (1): PHP Common Gateway Interface 'CGI' command
pid_namespaces (7): overview of Linux PID namespaces
ping (8): send ICMP ECHO_REQUEST to network hosts
ping4 (8): send ICMP ECHO_REQUEST to network hosts
ping6 (8): send ICMP ECHO_REQUEST to network hosts
pinky (1): lightweight finger
pipe (7): overview of pipes and FIFOs
pkcheck (1): Check whether a process is authorized
pkeys (7): overview of Memory Protection Keys
polkit (8): Authorization Framework
poll (2): wait for some event on a file descriptor
posix_spawn (3): spawn a process
posix_spawnp (3): spawn a process
postcat (1): show Postfix queue file contents
postfix-wrapper (5): Postfix multi-instance API
pow (3): power functions
pow10 (3): base-10 power functions
pow10f (3): base-10 power functions
pow10l (3): base-10 power functions
poweroff (8): Halt, power-off or reboot the machine
powf (3): power functions
powl (3): power functions
ppoll (2): wait for some event on a file descriptor
pread (2): read from or write to a file descriptor at a given offset
pread64 (2): read from or write to a file descriptor at a given offset
preadv (2): read or write data into multiple buffers
preadv2 (2): read or write data into multiple buffers
process_vm_readv (2): transfer data between process address spaces
process_vm_writev (2): transfer data between process address spaces
ptar (1): a tar-like program written in perl
pthread_create (3): create a new thread
pthread_join (3): join with a terminated thread
pthread_rwlockattr_getkind_np (3): set/get the read-write lock kind of the t...
pthread_rwlockattr_setkind_np (3): set/get the read-write lock kind of the t...
pthread_timedjoin_np (3): try to join with a terminated thread
pthread_tryjoin_np (3): try to join with a terminated thread
pure-ftpd-wrapper (8): configures and starts Pure-FTPd daemon
pure-ftpwho (8): Report current FTP sessions
pure-pw (8): Manage virtual users files for Pure-FTPd
pure-pwconvert (8): Generate a virtual users file from system accounts
pure-statsdecode (8): Show human-readable dates from a "stats" logfile
putgrent (3): write a group database entry to a file
putpwent (3): write a password file entry
putspent (3): get shadow password file entry
putw (3): input and output of words (ints)
putwc (3): write a wide character to a FILE stream
putwc_unlocked (3): nonlocking stdio functions
putwchar (3): write a wide character to standard output
putwchar_unlocked (3): nonlocking stdio functions
pwck (8): verify integrity of password files
pwconv (8): convert to and from shadow passwords and groups
pwd (1): print name of current/working directory
pwdx (1): report current working directory of a process
pwrite (2): read from or write to a file descriptor at a given offset
pwrite64 (2): read from or write to a file descriptor at a given offset
pwritev (2): read or write data into multiple buffers
pwritev2 (2): read or write data into multiple buffers
pwunconv (8): convert to and from shadow passwords and groups
pyjwt3 (1): Python implementation of JSON Web Token
random (7): overview of interfaces for obtaining randomness
raw (7): Linux IPv4 raw sockets
raw (8): bind a Linux raw character device
rawmemchr (3): scan memory for a character
rwarray (3am): write and read gawk arrays to/from files
readdir (3am): directory input parser for gawk
readline (3readline): get a line from a user with editing
readv (2): read or write data into multiple buffers
reboot (8): Halt, power-off or reboot the machine
regulatory.bin (5): The Linux wireless regulatory database
regulatory.db (5): The Linux wireless regulatory database
rescan-scsi-bus.sh (8): script to add and remove SCSI devices without rebooting
resizepart (8): tell the kernel about the new size of a partition
resolved.conf (5): Network Name Resolution configuration files
resolved.conf.d (5): Network Name Resolution configuration files
rev (1): reverse lines characterwise
revtwoway (3am): Reverse strings sample two-way processor extension
rewind (3): reposition a stream
rewinddir (3): reset directory stream
round (3): round to nearest integer, away from zero
roundf (3): round to nearest integer, away from zero
roundl (3): round to nearest integer, away from zero
route (8): show / manipulate the IP routing table
routel (8): list routes with pretty output format
rpmatch (3): determine if the answer to a question is affirmative o...
rt_sigsuspend (2): wait for a signal
rt_sigtimedwait (2): synchronously wait for queued signals
rtacct (8): network statistics tools.
rtcwake (8): enter a system sleep state until specified wakeup time
rtpr (8): replace backslashes with newlines.
rtstat (8): unified linux network statistics
runcon (1): run command with specified security context
runuser (1): run a command with substitute user and group ID
rview (1): Vi IMproved, a programmer's text editor
s390_guarded_storage (2): operations with z/Architecture guarded storage fac...
s390_pci_mmio_write (2): transfer data to/from PCI MMIO memory page
safe_finger (8): finger client wrapper that protects against nasty stuf...
scalb (3): multiply floating-point number by integral power of ra...
scalbf (3): multiply floating-point number by integral power of ra...
scalbl (3): multiply floating-point number by integral power of ra...
scalbln (3): multiply floating-point number by integral power of radix
scalblnf (3): multiply floating-point number by integral power of radix
scalblnl (3): multiply floating-point number by integral power of radix
scalbn (3): multiply floating-point number by integral power of radix
scalbnf (3): multiply floating-point number by integral power of radix
scalbnl (3): multiply floating-point number by integral power of radix
sched (7): overview of CPU scheduling
sched_getcpu (3): determine CPU on which the calling thread is running
screen (1): screen manager with VT100/ANSI terminal emulation
scsi_stop (8): stop (spin down) one or more SCSI disks
sdiff (1): (unknown subject)
securetty (5): file which lists terminals from which root can log in
sem_overview (7): overview of POSIX semaphores
sem_timedwait (3): lock a semaphore
sem_trywait (3): lock a semaphore
sem_wait (3): lock a semaphore
sendfile (2): transfer data between file descriptors
sendfile64 (2): transfer data between file descriptors
sensible-browser (1): sensible editing, paging, and web browsing
sensible-editor (1): sensible editing, paging, and web browsing
sensible-pager (1): sensible editing, paging, and web browsing
services (5): Internet network services list
setarch (8): change reported architecture in new program environmen...
sethostent (3): get network host entry
setnetent (3): get network entry
setnetgrent (3): handle network group entries
setns (2): reassociate thread with a namespace
setpriv (1): run a program with different Linux privilege settings
setpwent (3): get password file entry
setsid (1): run a program in a new session
setspent (3): get shadow password file entry
sg_compare_and_write (8): send the SCSI COMPARE AND WRITE command
sg_emc_trespass (8): change ownership of SCSI LUN from another Service-Proc...
sg_logs (8): access log pages with SCSI LOG SENSE command
sg_map (8): displays mapping between Linux sg and other SCSI devices
sg_modes (8): reads mode pages with SCSI MODE SENSE command
sg_prevent (8): send SCSI PREVENT ALLOW MEDIUM REMOVAL command
sg_raw (8): send arbitrary SCSI command to a device
sg_read (8): read multiple blocks of data, optionally with SCSI REA...
sg_reset_wp (8): send SCSI RESET WRITE POINTER command
sg_sanitize (8): remove all user data from disk with SCSI SANITIZE command
sg_test_rwbuf (8): test a SCSI host adapter by issuing dummy writes and r...
sg_unmap (8): send SCSI UNMAP command (known as 'trim' in ATA specs)
sg_wr_mode (8): write (modify) SCSI mode page
sg_write_verify (8): send the SCSI WRITE AND VERIFY command
sg_write_buffer (8): send SCSI WRITE BUFFER commands
sg_write_long (8): send SCSI WRITE LONG command
sg_write_same (8): send SCSI WRITE SAME command
sg_write_x (8): SCSI WRITE normal/ATOMIC/SAME/SCATTERED/STREAM, ORWRIT...
sgetspent (3): get shadow password file entry
sgetspent_r (3): get shadow password file entry
shadow (5): shadowed password file
shm_overview (7): overview of POSIX shared memory
showconsolefont (8): Show the current EGA/VGA console screen font
showkey (1): examine the codes sent by the keyboard
showq (8postfix): list the Postfix mail queue
shred (1): overwrite a file to hide its contents, and optionally ...
shutdown (2): shut down part of a full-duplex connection
shutdown (8): Halt, power-off or reboot the machine
siginterrupt (3): allow signals to interrupt system calls
signal (7): overview of signals
sigpause (3): atomically release blocked signals and wait for interrupt
sigsuspend (2): wait for a signal
sigtimedwait (2): synchronously wait for queued signals
sigwait (3): wait for a signal
sigwaitinfo (2): synchronously wait for queued signals
slattach (8): attach a network interface to a serial line
snap (8): Tool to interact with snaps
sockatmark (3): determine whether socket is at out-of-band mark
sos-clean (1): (unknown subject)
sos-collect (1): (unknown subject)
sos-collector (1): (unknown subject)
sos-help (1): (unknown subject)
sos-mask (1): (unknown subject)
sos-report (1): (unknown subject)
sosreport (1): (unknown subject)
spawn (8postfix): Postfix external command spawner
spawn-fcgi (1): Spawns FastCGI processes
spu_create (2): create a new spu context
srp (1ssl): maintain SRP password file
ssignal (3): software signal facility
stdbuf (1): Run COMMAND, with modified buffering operations for it...
strcasecmp (3): compare two strings ignoring case
strcat (3): concatenate two strings
strcmp (3): compare two strings
strcoll (3): compare two strings using the current locale
strncasecmp (3): compare two strings ignoring case
strncat (3): concatenate two strings
strncmp (3): compare two strings
strverscmp (3): compare two version strings
su (1): run a command with substitute user and group ID
sudo_root (8): How to run administrative commands
svcerr_weakauth (3): library routines for remote procedure calls
svcraw_create (3): library routines for remote procedure calls
swab (3): swap adjacent bytes
swapcontext (3): manipulate user context
swaplabel (8): print or change the label or UUID of a swap area
swapoff (2): start/stop swapping to file/device
swapoff (8): enable/disable devices and files for paging and swapping
swapon (2): start/stop swapping to file/device
swapon (8): enable/disable devices and files for paging and swapping
switch_root (8): switch to another filesystem as the root of the mount ...
swprintf (3): formatted wide-character output conversion
symlink (2): make a new name for a file
symlinkat (2): make a new name for a file
sync (1): Synchronize cached writes to persistent storage
sync_file_range (2): sync a file segment with disk
sync_file_range2 (2): sync a file segment with disk
sysctl (2): read/write system parameters
systemd-ask-password (1): Query the user for a system password
systemd-ask-password-console.path (8): Query the user for system passwords o...
systemd-ask-password-console.service (8): Query the user for system password...
systemd-ask-password-wall.path (8): Query the user for system passwords on t...
systemd-ask-password-wall.service (8): Query the user for system passwords o...
systemd-cat (1): Connect a pipeline or program's output with the journal
systemd-cgls (1): Recursively show control group contents
systemd-cgtop (1): Show top control groups by their resource usage
systemd-growfs (8): Creating and growing file systems on demand
systemd-growfs@.service (8): Creating and growing file systems on demand
systemd-halt.service (8): System shutdown logic
systemd-hwdb (8): hardware database management tool
systemd-inhibit (1): Execute a program with an inhibition lock taken
systemd-kexec.service (8): System shutdown logic
systemd-makefs (8): Creating and growing file systems on demand
systemd-makefs@.service (8): Creating and growing file systems on demand
systemd-mkswap@.service (8): Creating and growing file systems on demand
systemd-network-generator (8): Generate network configuration from the kerne...
systemd-network-generator.service (8): Generate network configuration from t...
systemd-networkd (8): Network manager
systemd-networkd-wait-online (8): Wait for network to come online
systemd-networkd-wait-online.service (8): Wait for network to come online
systemd-networkd.service (8): Network manager
systemd-poweroff.service (8): System shutdown logic
systemd-reboot.service (8): System shutdown logic
systemd-resolved (8): Network Name Resolution manager
systemd-resolved.service (8): Network Name Resolution manager
systemd-rfkill (8): Load and save the RF kill switch state at boot and change
systemd-rfkill.service (8): Load and save the RF kill switch state at boot a...
systemd-rfkill.socket (8): Load and save the RF kill switch state at boot an...
systemd-shutdown (8): System shutdown logic
systemd-time-wait-sync (8): Wait Until Kernel Time Synchronized
systemd-time-wait-sync.service (8): Wait Until Kernel Time Synchronized
systemd-timesyncd (8): Network Time Synchronization
systemd-timesyncd.service (8): Network Time Synchronization
systemd-tty-ask-password-agent (1): List or process pending systemd password...
systemd-udev-settle.service (8): Wait for all pending udev events to be handled
systemd-update-utmp (8): Write audit and utmp updates at bootup, runlevel ch...
systemd-update-utmp-runlevel.service (8): Write audit and utmp updates at bo...
systemd-update-utmp.service (8): Write audit and utmp updates at bootup, run...
systemd.link (5): Network device configuration
systemd.net-naming-scheme (7): Network device naming schemes
systemd.netdev (5): Virtual Network Device configuration
systemd.network (5): Network configuration
systemd.swap (5): Swap unit configuration
sysv_signal (3): signal handling with System V semantics
TAILQ_SWAP (3): implementations of singly-linked lists, singly-linked ...
tc-taprio (8): Time Aware Priority Shaper
tc (8): show / manipulate traffic control settings
tc-fq_codel (8): Fair Queuing (FQ) with Controlled Delay (CoDel)
tcflow (3): get and set terminal attributes, line control, get and...
tcpdchk (8): tcp wrapper configuration checker
tcpdmatch (8): tcp wrapper oracle
tcpdump (8): dump traffic on a network
tee (1): read from standard input and write to standard output ...
Text::CharWidth (3pm): Get number of occupied columns of a string on terminal
Text::WrapI18N (3pm): Line wrapping module with support for multibyte, fullw...
thin_delta (8): Print the differences in the mappings between two thin...
thin_ls (8): List thin volumes within a pool.
time (3am): time functions for gawk
time (7): overview of time and timers
timeout (1): run a command with a time limit
timesyncd.conf (5): Network Time Synchronization configuration files
timesyncd.conf.d (5): Network Time Synchronization configuration files
tipc-bearer (8): show or modify TIPC bearers
tipc-link (8): show links or modify link properties
tipc-nametable (8): show TIPC nametable
tipc-node (8): modify and show local node parameters or list peer nodes
tipc-socket (8): show TIPC socket (port) information
tolower (3): convert uppercase or lowercase
tolower_l (3): convert uppercase or lowercase
toupper (3): convert uppercase or lowercase
toupper_l (3): convert uppercase or lowercase
towctrans (3): wide-character transliteration
towlower (3): convert a wide character to lowercase
towlower_l (3): convert a wide character to lowercase
towupper (3): convert a wide character to uppercase
towupper_l (3): convert a wide character to uppercase
tracepath (8): traces path to a network host discovering MTU along th...
traceroute6 (8): traces path to a network host
traceroute6.iputils (8): traces path to a network host
trivial-rewrite (8postfix): Postfix address rewriting and resolving daemon
trunc (3): round to integer, toward zero
truncf (3): round to integer, toward zero
truncl (3): round to integer, toward zero
try-from (8): test program for the tcp_wrapper
Try::Tiny (3pm): Minimal try/catch with proper preservation of $@
twalk (3): manage a binary search tree
twalk_r (3): manage a binary search tree
twistd3 (1): run Twisted applications (TACs, TAPs)
tzselect (1): view timezones
ucf.conf (5): site-wide configuration file for ucf
udplite (7): Lightweight User Datagram Protocol
ufw (8): program for managing a netfilter firewall
ufw-framework (8): using the ufw framework
ulckpwdf (3): get shadow password file entry
ungetwc (3): push back a wide character onto a FILE stream
unix_chkpwd (8): Helper binary that verifies the password of the curren...
unix_update (8): Helper binary that updates the password of a given user
unshare (1): run program with some namespaces unshared from parent
update-passwd (8): safely update /etc/passwd, /etc/shadow and /etc/group
update-pciids (8): download new version of the PCI ID list
updwtmp (3): append an entry to the wtmp file
updwtmpx (3): append an entry to the wtmp file
upower (1): UPower command line tool
upowerd (8): UPower Daemon
uptime (1): Tell how long the system has been running.
URI::WithBase (3pm): URIs which remember their base
user_namespaces (7): overview of Linux user namespaces
useradd (8): create a new user or update default new user information
utmpdump (1): dump UTMP and WTMP files in raw format
uts_namespaces (7): overview of Linux UTS namespaces
uuidgen (1): create a new UUID value
vcstime (8): Show time in upper right hand corner of the console sc...
vdso (7): overview of the virtual ELF dynamic shared object
vfwprintf (3): formatted wide-character output conversion
vgimport (8): Register exported volume group with system
vgsplit (8): Move physical volumes into a new or existing volume group
view (1): Vi IMproved, a programmer's text editor
vigr (8): edit the password, group, shadow-password or shadow-gr...
vimdiff (1): edit two, three or four versions of a file with Vim an...
vipw (8): edit the password, group, shadow-password or shadow-gr...
vmware-checkvm (1): Check if running in a VM or not
vmware-toolbox-cmd (1): GUI toolbox (commandline version)
vmware-xferlogs (1): dump vm-support output to vmx logfile
vmxnet (9): vmware kernel module
vswprintf (3): formatted wide-character output conversion
vwarn (3): formatted error messages
vwarnx (3): formatted error messages
vwprintf (3): formatted wide-character output conversion
w (1): Show who is logged on and what they are doing.
w.procps (1): Show who is logged on and what they are doing.
wait (2): wait for process to change state
wait3 (2): wait for process to change state, BSD style
wait4 (2): wait for process to change state, BSD style
waitid (2): wait for process to change state
waitpid (2): wait for process to change state
wall (1): write a message to all users
warn (3): formatted error messages
warnx (3): formatted error messages
watch (1): execute a program periodically, showing output fullscreen
watchgnupg (1): Read and print logs from a socket
wavelan (4): AT&T GIS WaveLAN ISA device driver
wc (1): print newline, word, and byte counts for each file
wcpcpy (3): copy a wide-character string, returning a pointer to i...
wcpncpy (3): copy a fixed-size string of wide characters, returning...
wcrtomb (3): convert a wide character to a multibyte sequence
wcscasecmp (3): compare two wide-character strings, ignoring case
wcscat (3): concatenate two wide-character strings
wcschr (3): search a wide character in a wide-character string
wcscmp (3): compare two wide-character strings
wcscpy (3): copy a wide-character string
wcscspn (3): search a wide-character string for any of a set of wid...
wcsdup (3): duplicate a wide-character string
wcslen (3): determine the length of a wide-character string
wcsncasecmp (3): compare two fixed-size wide-character strings, ignorin...
wcsncat (3): concatenate two wide-character strings
wcsncmp (3): compare two fixed-size wide-character strings
wcsncpy (3): copy a fixed-size string of wide characters
wcsnlen (3): determine the length of a fixed-size wide-character st...
wcsnrtombs (3): convert a wide-character string to a multibyte string
wcspbrk (3): search a wide-character string for any of a set of wid...
wcsrchr (3): search a wide character in a wide-character string
wcsrtombs (3): convert a wide-character string to a multibyte string
wcsspn (3): advance in a wide-character string, skipping any of a ...
wcsstr (3): locate a substring in a wide-character string
wcstoimax (3): convert wide-character string to integer
wcstok (3): split wide-character string into tokens
wcstombs (3): convert a wide-character string to a multibyte string
wcstoumax (3): convert wide-character string to integer
wcswidth (3): determine columns needed for a fixed-size wide-charact...
wctob (3): try to represent a wide character as a single byte
wctomb (3): convert a wide character to a multibyte sequence
wctrans (3): wide-character translation mapping
wctype (3): wide-character classification
wcwidth (3): determine columns needed for a wide character
wdctl (8): show hardware watchdog status
whatis (1): display one-line manual page descriptions
whereis (1): locate the binary, source, and manual page files for a...
which (1): locate a command
whiptail (1): display dialog boxes from shell scripts
who (1): show who is logged on
whoami (1): print effective userid
wifi-status (1): monitor the wireless interface
Win32::DBIODBC (3pm): Win32::ODBC emulation layer for the DBI
wipefs (8): wipe a signature from a device
wmemchr (3): search a wide character in a wide-character array
wmemcmp (3): compare two arrays of wide-characters
wmemcpy (3): copy an array of wide-characters
wmemmove (3): copy an array of wide-characters
wmempcpy (3): copy memory area
wmemset (3): fill an array of wide-characters with a constant wide ...
wordexp (3): perform word expansion like a posix-shell
wordfree (3): perform word expansion like a posix-shell
wpa_action (8): wpa_cli action script
wpa_background (8): Background information on Wi-Fi Protected Access and I...
wpa_cli (8): WPA command line client
wpa_passphrase (8): Generate a WPA PSK from an ASCII passphrase for a SSID
wpa_supplicant (8): Wi-Fi Protected Access client and IEEE 802.1X supplicant
wpa_supplicant.conf (5): configuration file for wpa_supplicant
wprintf (3): formatted wide-character output conversion
write (1): send a message to another user
write (2): write to a file descriptor
writev (2): read or write data into multiple buffers
wtmp (5): login records
WWW::RobotRules (3pm): database of robots.txt-derived permissions
WWW::RobotRules::AnyDBM_File (3pm): Persistent RobotRules
x86_64 (8): change reported architecture in new program environmen...
x86_64-linux-gnu-dwp (1): The DWARF packaging utility
x86_64-linux-gnu-gcc-ar (1): a wrapper around ar adding the --plugin option
x86_64-linux-gnu-gcc-ar-9 (1): a wrapper around ar adding the --plugin option
x86_64-linux-gnu-gcc-nm (1): a wrapper around nm adding the --plugin option
x86_64-linux-gnu-gcc-nm-9 (1): a wrapper around nm adding the --plugin option
x86_64-linux-gnu-gcc-ranlib (1): a wrapper around ranlib adding the --plugin...
x86_64-linux-gnu-gcc-ranlib-9 (1): a wrapper around ranlib adding the --plug...
xcrypt (3): RFS password encryption
xdecrypt (3): RFS password encryption
xdr_wrapstring (3): library routines for external data representation
xencrypt (3): RFS password encryption
xfs_estimate (8): estimate the space that an XFS filesystem will take
xfs_growfs (8): expand an XFS filesystem
xfs_spaceman (8): show free space information about an XFS filesystem
xtables-monitor (8): show changes to rule set and trace-events
xzless (1): view xz or lzma compressed (text) files
xzmore (1): view xz or lzma compressed (text) files
ypdomainname (1): show or set the system's NIS/YP domain name
zless (1): file perusal filter for crt viewing of compressed text
zmore (1): file perusal filter for crt viewing of compressed text
znew (1): recompress .Z files to .gz files
zshcompwid (1): zsh completion widgets