Minix Man Pages

home | help

badblocks (8): search a device for bad blocks
blkdeactivate (8): utility to deactivate block devices
blkdiscard (8): discard sectors on a device
blkid (8): locate/print block device attributes
blkzone (8): run zone command on a device
blockdev (8): call block device ioctls from the command line
boltctl (1): control the thunderbolt device manager
boltd (8): thunderbolt device managing system daemon
bridge (8): show / manipulate bridge addresses and devices
btrfs-device (8): manage devices of btrfs filesystems
btrfs-replace (8): replace devices managed by btrfs with other device.
cache_check (8): validates cache metadata on a device or file.
cache_dump (8): dump cache metadata from device or file to standard ou...
cache_metadata_size (8): Estimate the size of the metadata device needed for...
cache_repair (8): repair cache binary metadata from device/file to devic...
cache_restore (8): restore cache metadata file to device or file.
cache_writeback (8): writeback dirty blocks to the origin device.
calendar (1): reminder service
cpuid (4): x86 CPUID access device
cryptsetup-reencrypt (8): tool for offline LUKS device re-encryption
dconf-service (1): D-Bus service for writes to the dconf database
devlink-dev (8): devlink device configuration
devlink-resource (8): devlink device resource configuration
dirmngr-client (1): Tool to access the Dirmngr services
dmeventd (8): Device-mapper event daemon
dmmp_flush_mpath (3): Flush specified multipath device map if unused.
dmmp_mpath_array_get (3): Query all existing multipath devices.
dmstats (8): device-mapper statistics management
dsp56k (4): DSP56001 interface device
endservent (3): get service entry
era_check (8): validate era metadata on device or file.
era_dump (8): dump era metadata from device or file to standard output.
era_restore (8): restore era metadata file to device or file.
fdatasync (2): synchronize a file's in-core state with storage device
freeaddrinfo (3): network address and service translation
fsadm (8): utility to resize or check filesystem on a device
fsync (2): synchronize a file's in-core state with storage device
full (4): always full device
fuse (4): Filesystem in Userspace (FUSE) device
gai_cancel (3): asynchronous network address and service translation
gai_error (3): asynchronous network address and service translation
gai_strerror (3): network address and service translation
gai_suspend (3): asynchronous network address and service translation
getaddrinfo (3): network address and service translation
getaddrinfo_a (3): asynchronous network address and service translation
getent (1): get entries from Name Service Switch libraries
getservbyname (3): get service entry
getservbyname_r (3): get service entry (reentrant)
getservbyport (3): get service entry
getservbyport_r (3): get service entry (reentrant)
getservent (3): get service entry
getservent_r (3): get service entry (reentrant)
getutmp (3): copy utmp structure to utmpx, and vice versa
getutmpx (3): copy utmp structure to utmpx, and vice versa
gnu_dev_major (3): manage a device number
gnu_dev_makedev (3): manage a device number
gnu_dev_minor (3): manage a device number
gpg-wks-client (1): Client for the Web Key Service
gpg-wks-server (1): Server providing the Web Key Service
grotty (1): groff driver for typewriter-like devices
grub-bios-setup (8): set up a device to boot using GRUB
grub-install (8): install GRUB to a device
grub-mkdevicemap (8): make a device map file automatically
grub-probe (8): probe device information for GRUB
hcp-device (4): Hot Copy snapshot devices
hcp-setup (8): Hot Copy device driver installation utility
hd (4): MFM/IDE hard disk devices
hdparm (8): get/set SATA/IDE device parameters
tc-hfsc (8): Hierarchical Fair Service Curve's control under linux
init (1): systemd system and service manager
ioctl (2): control device
ip (8): show / manipulate routing, network devices, interfaces...
ip-link (8): network device configuration
ip-macsec (8): MACsec device configuration
iw (8): show / manipulate wireless devices and their configura...
journald.conf (5): Journal service configuration files
journald.conf.d (5): Journal service configuration files
journald@.conf (5): Journal service configuration files
kpartx (8): Create device maps from partition tables.
libdmmp.h (3): Device Mapper Multipath API.
libnetlink (3): A library for accessing the netlink service
lirc (4): lirc devices
loop (4): loop devices
loop-control (4): loop devices
losetup (8): set up and control loop devices
lp (4): line printer devices
lsblk (8): list block devices
lspci (8): list all PCI devices
lsusb (8): list USB devices
luksformat (8): Create and format an encrypted LUKS device
lvmdiskscan (8): List devices that may be used as physical volumes
madvise (2): give advice about use of memory
major (3): manage a device number
make-bcache (8): create a cache device
makedev (3): manage a device number
md (4): Multiple Device driver aka Linux Software RAID
mdadm (8): manage MD devices aka Linux Software RAID
minor (3): manage a device number
mmap (2): map or unmap files or devices into memory
mmap2 (2): map files or devices into memory
mmap64 (3): map or unmap files or devices into memory
mpath_persistent_reserve_in (3): send PRIN command to DM device
mpath_persistent_reserve_out (3): send PROUT command to DM device
msr (4): x86 CPU MSR access device
multipath (8): Device mapper target autoconfig.
munmap (2): map or unmap files or devices into memory
netdevice (7): low-level access to Linux network devices
networkd-dispatcher (8): Dispatcher service for systemd-networkd connection ...
nroff (1): use groff to format documents for TTY devices
nss (5): Name Service Switch configuration file
nsswitch.conf (5): Name Service Switch configuration file
ordchr (3am): convert characters to strings and vice versa
packet (7): packet interface on device level
pam_listfile (8): deny or allow services based on an arbitrary file
pam_securetty (8): Limit root login to special devices
pciconfig_iobase (2): pci device information handling
pciconfig_read (2): pci device information handling
pciconfig_write (2): pci device information handling
pcilib (7): a library for accessing PCI devices
plipconfig (8): fine tune PLIP device parameters
pollinate (1): an Entropy-as-a-Service client
posix_madvise (3): give advice about patterns of memory usage
posix_openpt (3): open a pseudoterminal device
postfix-add-filter (8): add filter service to Postfix master.cf
postfix-add-policy (8): add policy service to Postfix master.cf
postkick (1): kick a Postfix service
probe-bcache (8): probe a bcache device
ram (4): ram disk device
random (4): kernel random number source devices
raw (8): bind a Linux raw character device
rdma-dev (8): RDMA device configuration
rescan-scsi-bus.sh (8): script to add and remove SCSI devices without rebooting
scsi_mandat (8): check SCSI device support for mandatory commands
scsi_ready (8): do SCSI TEST UNIT READY on devices
scsi_satl (8): check SCSI to ATA Translation (SAT) device support
scsi_temperature (8): fetch the temperature of a SCSI device
service (8): run a System V init script
services (5): Internet network services list
setpci (8): configure PCI devices
setservent (3): get service entry
setup (2): setup devices and filesystems, mount root filesystem
sg_dd (8): copy data to and from files and devices, especially SC...
sg_emc_trespass (8): change ownership of SCSI LUN from another Service-Proc...
sg_map (8): displays mapping between Linux sg and other SCSI devices
sg_map26 (8): map SCSI generic (sg) device to corresponding device n...
sg_raw (8): send arbitrary SCSI command to a device
sg_reset (8): sends SCSI device, target, bus or host reset; or check...
sg_sat_identify (8): send ATA IDENTIFY DEVICE command via SCSI to ATA Trans...
sg_scan (8): scans sg devices (or SCSI/ATAPI/ATA devices) and print...
sg_ses (8): access a SCSI Enclosure Services (SES) device
sg_timestamp (8): report or set timestamp on SCSI device
sg_verify (8): invoke SCSI VERIFY command(s) on a block device
sg_xcopy (8): copy data to and from files and devices using SCSI EXT...
sginfo (8): access mode page information for a SCSI (or ATAPI) device
sgm_dd (8): copy data to and from files and devices, especially SC...
sgp_dd (8): copy data to and from files and devices, especially SC...
st (4): SCSI tape device
swapoff (2): start/stop swapping to file/device
swapoff (8): enable/disable devices and files for paging and swapping
swapon (2): start/stop swapping to file/device
swapon (8): enable/disable devices and files for paging and swapping
system.conf.d (5): System and session service manager configuration files
systemctl (1): Control the systemd system and service manager
systemd (1): systemd system and service manager
systemd-ask-password-console.service (8): Query the user for system password...
systemd-ask-password-wall.service (8): Query the user for system passwords o...
systemd-backlight@.service (8): Load and save the display backlight brightne...
systemd-binfmt.service (8): Configure additional binary formats for executab...
systemd-bless-boot-generator (8): Pull systemd-bless-boot.service into the i...
systemd-bless-boot.service (8): Mark current boot process as successful
systemd-boot-check-no-failures.service (8): verify that the system booted up...
systemd-boot-system-token.service (8): Generate an initial boot loader syste...
systemd-cryptsetup@.service (8): Full disk decryption logic
systemd-fsck-root.service (8): File system checker logic
systemd-fsck@.service (8): File system checker logic
systemd-fsckd.service (8): File system check progress reporting
systemd-growfs@.service (8): Creating and growing file systems on demand
systemd-halt.service (8): System shutdown logic
systemd-hibernate-resume@.service (8): Resume from hibernation
systemd-hibernate.service (8): System sleep state logic
systemd-hostnamed.service (8): Host name bus mechanism
systemd-hybrid-sleep.service (8): System sleep state logic
systemd-importd (8): VM and container image import and export service
systemd-importd.service (8): VM and container image import and export service
systemd-initctl.service (8): /dev/initctl compatibility
systemd-journald (8): Journal service
systemd-journald-audit.socket (8): Journal service
systemd-journald-dev-log.socket (8): Journal service
systemd-journald-varlink@.socket (8): Journal service
systemd-journald.service (8): Journal service
systemd-journald.socket (8): Journal service
systemd-journald@.service (8): Journal service
systemd-journald@.socket (8): Journal service
systemd-kexec.service (8): System shutdown logic
systemd-localed.service (8): Locale bus mechanism
systemd-logind.service (8): Login manager
systemd-machine-id-commit.service (8): Commit a transient machine ID to disk
systemd-makefs@.service (8): Creating and growing file systems on demand
systemd-mkswap@.service (8): Creating and growing file systems on demand
systemd-modules-load.service (8): Load kernel modules at boot
systemd-network-generator.service (8): Generate network configuration from t...
systemd-networkd-wait-online.service (8): Wait for network to come online
systemd-networkd.service (8): Network manager
systemd-notify (1): Notify service manager about start-up completion and o...
systemd-poweroff.service (8): System shutdown logic
systemd-pstore (8): A service to archive contents of pstore
systemd-pstore.service (8): A service to archive contents of pstore
systemd-quotacheck.service (8): File system quota checker logic
systemd-random-seed.service (8): Load and save the system random seed at boo...
systemd-reboot.service (8): System shutdown logic
systemd-remount-fs.service (8): Remount root and kernel file systems
systemd-resolved.service (8): Network Name Resolution manager
systemd-rfkill.service (8): Load and save the RF kill switch state at boot a...
systemd-run (1): Run programs in transient scope units, service units, ...
systemd-suspend-then-hibernate.service (8): System sleep state logic
systemd-suspend.service (8): System sleep state logic
systemd-sysctl.service (8): Configure kernel parameters at boot
systemd-system.conf (5): System and session service manager configuration files
systemd-sysusers.service (8): Allocate system users and groups
systemd-time-wait-sync.service (8): Wait Until Kernel Time Synchronized
systemd-timedated.service (8): Time and date bus mechanism
systemd-timesyncd.service (8): Network Time Synchronization
systemd-tmpfiles-clean.service (8): Creates, deletes and cleans up volatile ...
systemd-tmpfiles-setup-dev.service (8): Creates, deletes and cleans up volat...
systemd-tmpfiles-setup.service (8): Creates, deletes and cleans up volatile ...
systemd-udev-settle.service (8): Wait for all pending udev events to be handled
systemd-udevd (8): Device event managing daemon
systemd-udevd-control.socket (8): Device event managing daemon
systemd-udevd-kernel.socket (8): Device event managing daemon
systemd-udevd.service (8): Device event managing daemon
systemd-update-utmp-runlevel.service (8): Write audit and utmp updates at bo...
systemd-update-utmp.service (8): Write audit and utmp updates at bootup, run...
systemd-user-sessions.service (8): Permit user logins after boot, prohibit u...
systemd-user.conf (5): System and session service manager configuration files
systemd-veritysetup@.service (8): Disk integrity protection logic
systemd-volatile-root.service (8): Make the root file system volatile
systemd.device (5): Device unit configuration
systemd.link (5): Network device configuration
systemd.net-naming-scheme (7): Network device naming schemes
systemd.netdev (5): Virtual Network Device configuration
systemd.preset (5): Service enablement presets
systemd.service (5): Service unit configuration
tc-hfsc (7): Hierarchical Fair Service Curve
tcpd (8): access control facility for internet services
thin_check (8): validates thin provisioning metadata on a device or file
thin_dump (8): dump thin provisioning metadata from device or file to...
thin_metadata_size (8): thin provisioning metadata device/file size calculator.
thin_restore (8): restore thin provisioning metadata file to device or f...
ttytype (5): terminal device to default terminal type mapping
ua (1): Manage Ubuntu Advantage services from Canonical
ubuntu-advantage (1): Manage Ubuntu Advantage services from Canonical
udev (7): Dynamic device management
udev.conf (5): Configuration for device event managing daemon
urandom (4): kernel random number source devices
usb-devices (1): print USB device details
usbhid-dump (8): dump USB HID device report descriptors and streams
user-runtime-dir@.service (5): System units to manage user processes
user.conf.d (5): System and session service manager configuration files
user@.service (5): System units to manage user processes
veth (4): Virtual Ethernet Device
vgmknodes (8): Create the special files for volume group devices in /dev
wavelan (4): AT&T GIS WaveLAN ISA device driver
wipefs (8): wipe a signature from a device
zramctl (8): set up and control zram devices