Minix Man Pages

home | help

modules (5): kernel modules to load at boot time
__ppc_get_timebase (3): get the current value of the Time Base Register on P...
__ppc_get_timebase_freq (3): get the current value of the Time Base Register...
adjtime (3): correct the time to synchronize the system clock
adjtime_config (5): information about hardware clock setting and drift factor
adjtimex (2): tune kernel clock
aio_suspend (3): wait for asynchronous I/O operation or timeout
asctime (3): transform date and time to broken-down time or ASCII
asctime_r (3): transform date and time to broken-down time or ASCII
bootparam (7): introduction to boot time parameters of the Linux kernel
chrt (1): manipulate the real-time attributes of a process
clock (3): determine processor time
clock_getcpuclockid (3): obtain ID of a process CPU-time clock
clock_getres (2): clock and time functions
clock_getres (3): clock and time functions
clock_gettime (2): clock and time functions
clock_gettime (3): clock and time functions
clock_settime (2): clock and time functions
clock_settime (3): clock and time functions
ctime (3): transform date and time to broken-down time or ASCII
ctime_r (3): transform date and time to broken-down time or ASCII
date (1): print or set the system date and time
Date::Parse (3pm): Parse date strings into time values
daylight (3): initialize time conversion information
difftime (3): calculate time difference
dmmp_context_timeout_get (3): Get IPC timeout.
dmmp_context_timeout_set (3): Set IPC timeout.
dnssec-settime (1): set the key timing metadata for a DNSSEC key
tc-etf (8): Earliest TxTime First (ETF) Qdisc
finalrd (1): final runtime directory generator for shutdown
ftime (3): return date and time
utimensat (2): change file timestamps with nanosecond precision
futimens (3): change file timestamps with nanosecond precision
futimes (3): change file timestamps
futimesat (2): change timestamps of a file relative to a directory fi...
getdate (3): convert a date-plus-time string to broken-down time
getdate_err (3): convert a date-plus-time string to broken-down time
getdate_r (3): convert a date-plus-time string to broken-down time
getitimer (2): get or set value of an interval timer
gettimeofday (2): get / set time
gmtime (3): transform date and time to broken-down time or ASCII
gmtime_r (3): transform date and time to broken-down time or ASCII
hcp (8): Hot Copy creates point-in-time snapshots of any Linux ...
hwclock (8): time clocks utility
kbdrate (8): reset the keyboard repeat rate and delay time
keep-one-running (1): run just one instance at a time of some command and un...
ldconfig (8): configure dynamic linker run-time bindings
localtime (3): transform date and time to broken-down time or ASCII
localtime (5): Local timezone configuration file
localtime_r (3): transform date and time to broken-down time or ASCII
lutimes (3): change file timestamps
mktime (3): transform date and time to broken-down time or ASCII
mq_timedreceive (2): receive a message from a message queue
mq_timedreceive (3): receive a message from a message queue
mq_timedsend (2): send a message to a message queue
mq_timedsend (3): send a message to a message queue
node (1): server-side JavaScript runtime
ntp_adjtime (3): tune kernel clock
ntp_gettime (3): get time parameters (NTP daemon interface)
ntp_gettimex (3): get time parameters (NTP daemon interface)
openssl-s_time (1ssl): SSL/TLS performance timing program
openssl-ts (1ssl): Time Stamping Authority tool (client/server)
openssl-tsget (1ssl): Time Stamping HTTP/HTTPS client
pam_time (8): PAM module for time control access
pam_timestamp (8): Authenticate using cached successful authentication at...
pam_timestamp_check (8): Check to see if the default timestamp is valid
profil (3): execution time profile
pthread_getcpuclockid (3): retrieve ID of a thread's CPU time clock
pthread_timedjoin_np (3): try to join with a terminated thread
rt_sigtimedwait (2): synchronously wait for queued signals
rtc (4): real-time clock
rtcwake (8): enter a system sleep state until specified wakeup time
rtime (3): get time from a remote machine
run-one (1): run just one instance at a time of some command and un...
run-one-constantly (1): run just one instance at a time of some command and ...
run-one-until-failure (1): run just one instance at a time of some command a...
run-one-until-success (1): run just one instance at a time of some command a...
run-this-one (1): run just one instance at a time of some command and un...
s390_runtime_instr (2): enable/disable s390 CPU run-time instrumentation
s_time (1ssl): SSL/TLS performance timing program
sem_timedwait (3): lock a semaphore
semtimedop (2): System V semaphore operations
setitimer (2): get or set value of an interval timer
settimeofday (2): get / set time
sg_timestamp (8): report or set timestamp on SCSI device
sigtimedwait (2): synchronously wait for queued signals
slabtop (1): display kernel slab cache information in real time
sleep (1): delay for a specified amount of time
stime (2): set time
strftime (3): format date and time
strptime (3): convert a string representation of time to a time tm s...
sudoers_timestamp (5): Sudoers Time Stamp Format
sysconf (3): get configuration information at run time
sysctl (8): configure kernel parameters at runtime
systemd-debug-generator (8): Generator for enabling a runtime debug shell an...
systemd-time-wait-sync (8): Wait Until Kernel Time Synchronized
systemd-time-wait-sync.service (8): Wait Until Kernel Time Synchronized
systemd-timedated (8): Time and date bus mechanism
systemd-timedated.service (8): Time and date bus mechanism
systemd-timesyncd (8): Network Time Synchronization
systemd-timesyncd.service (8): Network Time Synchronization
systemd-tmpfiles-clean.timer (8): Creates, deletes and cleans up volatile an...
systemd.time (7): Time and date specifications
systemd.timer (5): Timer unit configuration
tc-taprio (8): Time Aware Priority Shaper
time (1): run programs and summarize system resource usage
time (2): get time in seconds
time (3am): time functions for gawk
time (7): overview of time and timers
time.conf (5): configuration file for the pam_time module
Time::Zone (3pm): - miscellaneous timezone manipulations routines
timedatectl (1): Control the system time and date
timegm (3): inverses of gmtime and localtime
timelocal (3): inverses of gmtime and localtime
timeout (1): run a command with a time limit
timer_create (2): create a POSIX per-process timer
timer_delete (2): delete a POSIX per-process timer
timer_getoverrun (2): get overrun count for a POSIX per-process timer
timer_gettime (2): arm/disarm and fetch state of POSIX per-process timer
timer_settime (2): arm/disarm and fetch state of POSIX per-process timer
timeradd (3): timeval operations
timerclear (3): timeval operations
timercmp (3): timeval operations
timerfd_create (2): timers that notify via file descriptors
timerfd_gettime (2): timers that notify via file descriptors
timerfd_settime (2): timers that notify via file descriptors
timerisset (3): timeval operations
timersub (3): timeval operations
times (2): get process times
timesyncd.conf (5): Network Time Synchronization configuration files
timesyncd.conf.d (5): Network Time Synchronization configuration files
timezone (3): initialize time conversion information
touch (1): change file timestamps
ts (1ssl): Time Stamping Authority tool (client/server)
tsget (1ssl): Time Stamping HTTP/HTTPS client
tzfile (5): timezone information
tzname (3): initialize time conversion information
tzselect (1): view timezones
tzselect (8): select a timezone
tzset (3): initialize time conversion information
uptime (1): Tell how long the system has been running.
user-runtime-dir@.service (5): System units to manage user processes
utime (2): change file last access and modification times
utimes (2): change file last access and modification times
vcstime (8): Show time in upper right hand corner of the console sc...
vtimes (3): get resource usage
xfs_rtcp (8): XFS realtime copy command
zdump (8): timezone dumper
zic (8): timezone compiler