Minix Man Pages

home | help

FD_ISSET (3): synchronous I/O multiplexing
FD_SET (3): synchronous I/O multiplexing
__fsetlocking (3): interfaces to stdio FILE structure
__ppc_set_ppr_low (3): Set the Program Priority Register
__ppc_set_ppr_med (3): Set the Program Priority Register
__ppc_set_ppr_med_high (3): Set the Program Priority Register
__ppc_set_ppr_med_low (3): Set the Program Priority Register
__ppc_set_ppr_very_low (3): Set the Program Priority Register
__setfpucw (3): set FPU control word on i386 architecture (obsolete)
_llseek (2): reposition read/write file offset
adjtime_config (5): information about hardware clock setting and drift factor
alarm (2): set an alarm clock for delivery of a signal
apt-mark (8): show, set and unset various settings for a package
arch_prctl (2): set architecture-specific thread state
armscii-8 (7): Armenian character set encoded in octal, decimal, and ...
ascii (7): ASCII character set encoded in octal, decimal, and hex...
bind_textdomain_codeset (3): set encoding of message translations
bindtextdomain (3): set directory containing message catalogs
bootctl (1): Control the firmware and boot manager settings
btrfs-property (8): get/set/list properties for given filesystem object
capget (2): set/get capabilities of thread(s)
capset (2): set/get capabilities of thread(s)
cfgetispeed (3): get and set terminal attributes, line control, get and...
cfgetospeed (3): get and set terminal attributes, line control, get and...
cfmakeraw (3): get and set terminal attributes, line control, get and...
cfsetispeed (3): get and set terminal attributes, line control, get and...
cfsetospeed (3): get and set terminal attributes, line control, get and...
cfsetspeed (3): get and set terminal attributes, line control, get and...
charmap (5): character set description file
charsets (7): character set standards and internationalization
clearerr (3): check and reset stream status
clock_settime (2): clock and time functions
clock_settime (3): clock and time functions
console-setup (5): configuration file for setupcon
cp1251 (7): CP 1251 character set encoded in octal, decimal, and h...
cp1252 (7): CP 1252 character set encoded in octal, decimal, and h...
CPU_ALLOC (3): macros for manipulating CPU sets
CPU_ALLOC_SIZE (3): macros for manipulating CPU sets
CPU_AND (3): macros for manipulating CPU sets
CPU_AND_S (3): macros for manipulating CPU sets
CPU_CLR (3): macros for manipulating CPU sets
CPU_CLR_S (3): macros for manipulating CPU sets
CPU_COUNT (3): macros for manipulating CPU sets
CPU_COUNT_S (3): macros for manipulating CPU sets
CPU_EQUAL (3): macros for manipulating CPU sets
CPU_EQUAL_S (3): macros for manipulating CPU sets
CPU_FREE (3): macros for manipulating CPU sets
CPU_ISSET (3): macros for manipulating CPU sets
CPU_ISSET_S (3): macros for manipulating CPU sets
CPU_OR (3): macros for manipulating CPU sets
CPU_OR_S (3): macros for manipulating CPU sets
CPU_SET (3): macros for manipulating CPU sets
CPU_SET_S (3): macros for manipulating CPU sets
CPU_XOR (3): macros for manipulating CPU sets
CPU_XOR_S (3): macros for manipulating CPU sets
CPU_ZERO (3): macros for manipulating CPU sets
CPU_ZERO_S (3): macros for manipulating CPU sets
cpuset (7): confine processes to processor and memory node subsets
crypt_checksalt (3): validate a crypt setting string
crypt_gensalt (3): encode settings for passphrase hashing
crypt_gensalt_ra (3): encode settings for passphrase hashing
crypt_gensalt_rn (3): encode settings for passphrase hashing
cryptdisks_start (8): wrapper around cryptsetup that parses /etc/crypttab.
cryptdisks_stop (8): wrapper around cryptsetup that parses /etc/crypttab.
cryptsetup (8): manage plain dm-crypt and LUKS encrypted volumes
cryptsetup-reencrypt (8): tool for offline LUKS device re-encryption
ctrlaltdel (8): set the function of the Ctrl-Alt-Del combination
date (1): print or set the system date and time
DBI::Util::CacheMemory (3pm): a very fast but very minimal subset of Cache::...
deb-systemd-helper (1p): subset of systemctl for machines not running systemd
debconf-set-selections (1): insert new values into the debconf database
des_setparity (3): fast DES encryption
dircolors (1): color setup for ls
dmmp_context_log_func_set (3): Set log handler function.
dmmp_context_log_priority_set (3): Set log priority.
dmmp_context_timeout_set (3): Set IPC timeout.
dmmp_context_userdata_set (3): Set user data pointer.
dmsetup (8): low level logical volume management
dnssec-revoke (1): set the REVOKED bit on a DNSSEC key
dnssec-settime (1): set the key timing metadata for a DNSSEC key
domainname (1): show or set the system's NIS/YP domain name
dosfslabel (8): set or get MS-DOS filesystem label
dpkg-architecture (1): set and determine the architecture for package building
ethtool (8): query or control network driver and hardware settings
faillog (8): display faillog records or set login failure limits
fatlabel (8): set or get MS-DOS filesystem label
feof (3): check and reset stream status
ferror (3): check and reset stream status
fesetenv (3): floating-point rounding and exception handling
fesetexceptflag (3): floating-point rounding and exception handling
fesetround (3): floating-point rounding and exception handling
ffs (3): find first bit set in a word
ffsl (3): find first bit set in a word
ffsll (3): find first bit set in a word
fileno (3): check and reset stream status
fsetpos (3): reposition a stream
fsetxattr (2): set an extended attribute value
fts_set (3): traverse a file hierarchy
fwide (3): set and determine the orientation of a FILE stream
gendsa (1ssl): generate a DSA private key from a set of parameters
get_robust_list (2): get/set list of robust futexes
getcontext (2): get or set the user context
getcontext (3): get or set the user context
getdomainname (2): get/set NIS domain name
getgroups (2): get/set list of supplementary group IDs
getgroups32 (2): get/set list of supplementary group IDs
gethostid (2): get or set the unique identifier of the current host
gethostid (3): get or set the unique identifier of the current host
gethostname (2): get/set hostname
getitimer (2): get or set value of an interval timer
getpgid (2): set/get process group
getpgrp (2): set/get process group
getpriority (2): get/set program scheduling priority
getrlimit (2): get/set resource limits
getsockopt (2): get and set options on sockets
gettimeofday (2): get / set time
git-config (1): Get and set repository or global options
git-quiltimport (1): Applies a quilt patchset onto the current branch
git-remote (1): Manage set of tracked repositories
git-reset (1): Reset current HEAD to the specified state
git-sh-i18n (1): Git's i18n setup code for shell scripts
git-sh-setup (1): Common Git shell script setup code
giteveryday (7): A useful minimum set of commands for Everyday Git
glib-compile-schemas (1): GSettings schema compiler
gpg-preset-passphrase (1): Put a passphrase into gpg-agent's cache
grub-bios-setup (8): set up a device to boot using GRUB
grub-reboot (8): set the default boot entry for GRUB, for the next boot...
grub-set-default (8): set the saved default boot entry for GRUB
gsettings (1): GSettings configuration tool
hcp-setup (8): Hot Copy device driver installation utility
hdparm (8): get/set SATA/IDE device parameters
hostname (1): show or set the system's host name
HTML::Tagset (3pm): data tables useful in parsing HTML
iconv (3): perform character set conversion
iconv_close (3): deallocate descriptor for character set conversion
iconv_open (3): allocate descriptor for character set conversion
install (1): copy files and set attributes
integritysetup (8): manage dm-integrity (block level integrity) volumes
IO::HTML (3pm): Open an HTML file with automatic charset detection
io_setup (2): create an asynchronous I/O context
ionice (1): set or get process I/O scheduling class and priority
ioperm (2): set port input/output permissions
ioprio_get (2): get/set I/O scheduling class and priority
ioprio_set (2): get/set I/O scheduling class and priority
ip6tables-legacy (8): iptables using old getsockopt/setsockopt-based kernel api
ip6tables-legacy-restore (8): iptables using old getsockopt/setsockopt-based...
ip6tables-legacy-save (8): iptables using old getsockopt/setsockopt-based ke...
iptables-legacy (8): iptables using old getsockopt/setsockopt-based kernel api
iptables-legacy-restore (8): iptables using old getsockopt/setsockopt-based ...
iptables-legacy-save (8): iptables using old getsockopt/setsockopt-based ker...
iso-8859-1 (7): ISO 8859-1 character set encoded in octal, decimal, an...
iso-8859-10 (7): ISO 8859-10 character set encoded in octal, decimal, a...
iso-8859-11 (7): ISO 8859-11 character set encoded in octal, decimal, a...
iso-8859-13 (7): ISO 8859-13 character set encoded in octal, decimal, a...
iso-8859-14 (7): ISO 8859-14 character set encoded in octal, decimal, a...
iso-8859-15 (7): ISO 8859-15 character set encoded in octal, decimal, a...
iso-8859-16 (7): ISO 8859-16 character set encoded in octal, decimal, a...
iso-8859-2 (7): ISO 8859-2 character set encoded in octal, decimal, an...
iso-8859-3 (7): ISO 8859-3 character set encoded in octal, decimal, an...
iso-8859-4 (7): ISO 8859-4 character set encoded in octal, decimal, an...
iso-8859-5 (7): ISO 8859-5 character set encoded in octal, decimal, an...
iso-8859-6 (7): ISO 8859-6 character set encoded in octal, decimal, an...
iso-8859-7 (7): ISO 8859-7 character set encoded in octal, decimal, an...
iso-8859-8 (7): ISO 8859-8 character set encoded in octal, decimal, an...
iso-8859-9 (7): ISO 8859-9 character set encoded in octal, decimal, an...
iso_8859-1 (7): ISO 8859-1 character set encoded in octal, decimal, an...
iso_8859-10 (7): ISO 8859-10 character set encoded in octal, decimal, a...
iso_8859-11 (7): ISO 8859-11 character set encoded in octal, decimal, a...
iso_8859-13 (7): ISO 8859-13 character set encoded in octal, decimal, a...
iso_8859-14 (7): ISO 8859-14 character set encoded in octal, decimal, a...
iso_8859-15 (7): ISO 8859-15 character set encoded in octal, decimal, a...
iso_8859-16 (7): ISO 8859-16 character set encoded in octal, decimal, a...
iso_8859-2 (7): ISO 8859-2 character set encoded in octal, decimal, an...
iso_8859-3 (7): ISO 8859-3 character set encoded in octal, decimal, an...
iso_8859-4 (7): ISO 8859-4 character set encoded in octal, decimal, an...
iso_8859-5 (7): ISO 8859-5 character set encoded in octal, decimal, an...
iso_8859-6 (7): ISO 8859-6 character set encoded in octal, decimal, an...
iso_8859-7 (7): ISO 8859-7 character set encoded in octal, decimal, an...
iso_8859-8 (7): ISO 8859-8 character set encoded in octal, decimal, an...
iso_8859-9 (7): ISO 8859-9 character set encoded in octal, decimal, an...
iso_8859_1 (7): ISO 8859-1 character set encoded in octal, decimal, an...
iso_8859_10 (7): ISO 8859-10 character set encoded in octal, decimal, a...
iso_8859_11 (7): ISO 8859-11 character set encoded in octal, decimal, a...
iso_8859_13 (7): ISO 8859-13 character set encoded in octal, decimal, a...
iso_8859_14 (7): ISO 8859-14 character set encoded in octal, decimal, a...
iso_8859_15 (7): ISO 8859-15 character set encoded in octal, decimal, a...
iso_8859_16 (7): ISO 8859-16 character set encoded in octal, decimal, a...
iso_8859_2 (7): ISO 8859-2 character set encoded in octal, decimal, an...
iso_8859_3 (7): ISO 8859-3 character set encoded in octal, decimal, an...
iso_8859_4 (7): ISO 8859-4 character set encoded in octal, decimal, an...
iso_8859_5 (7): ISO 8859-5 character set encoded in octal, decimal, an...
iso_8859_6 (7): ISO 8859-6 character set encoded in octal, decimal, an...
iso_8859_7 (7): ISO 8859-7 character set encoded in octal, decimal, an...
iso_8859_8 (7): ISO 8859-8 character set encoded in octal, decimal, an...
iso_8859_9 (7): ISO 8859-9 character set encoded in octal, decimal, an...
kbd_mode (1): report or set the keyboard mode
kbdrate (8): reset the keyboard repeat rate and delay time
key_secretkey_is_set (3): interfaces to rpc keyserver daemon
key_setsecret (3): interfaces to rpc keyserver daemon
syslog (2): read and/or clear kernel message ring buffer; set cons...
klogctl (3): read and/or clear kernel message ring buffer; set cons...
koi8-r (7): Russian character set encoded in octal, decimal, and h...
koi8-u (7): Ukrainian character set encoded in octal, decimal, and...
latin1 (7): ISO 8859-1 character set encoded in octal, decimal, an...
latin10 (7): ISO 8859-16 character set encoded in octal, decimal, a...
latin2 (7): ISO 8859-2 character set encoded in octal, decimal, an...
latin3 (7): ISO 8859-3 character set encoded in octal, decimal, an...
latin4 (7): ISO 8859-4 character set encoded in octal, decimal, an...
latin5 (7): ISO 8859-9 character set encoded in octal, decimal, an...
latin6 (7): ISO 8859-10 character set encoded in octal, decimal, a...
latin7 (7): ISO 8859-13 character set encoded in octal, decimal, a...
latin8 (7): ISO 8859-14 character set encoded in octal, decimal, a...
latin9 (7): ISO 8859-15 character set encoded in octal, decimal, a...
llseek (2): reposition read/write file offset
locale.conf (5): Configuration file for locale settings
localectl (1): Control the system locale and keyboard layout settings
losetup (8): set up and control loop devices
lseek (2): reposition read/write file offset
lseek64 (3): reposition 64-bit read/write file offset
lsetxattr (2): set an extended attribute value
malloc_set_state (3): record and restore state of malloc implementation
mallopt (3): set memory allocation parameters
mbind (2): set memory policy for a memory range
membarrier (2): issue memory barriers on a set of threads
memset (3): fill memory with a constant byte
migrate_pages (2): move all pages in a process to another set of nodes
mkswap (8): set up a Linux swap area
modify_ldt (2): get or set a per-process LDT entry
mprotect (2): set protection on a region of memory
mq_getattr (3): get/set message queue attributes
mq_getsetattr (2): get/set message queue attributes
mq_setattr (3): get/set message queue attributes
netplan-set (8): write netplan YAML configuration snippets to file
nisdomainname (1): show or set the system's NIS/YP domain name
offsetof (3): offset of a structure member
openssl-gendsa (1ssl): generate a DSA private key from a set of parameters
pam_cap (8): PAM module to set inheritable capabilities
pam_env (7): PAM module to set/unset environment variables
pam_selinux (7): PAM module to set the default security context
pam_umask (8): PAM module to set the file mode creation mask
perf_event_open (2): set up performance monitoring
personality (2): set the process execution domain
pkey_mprotect (2): set protection on a region of memory
pmap_set (3): library routines for remote procedure calls
pmap_unset (3): library routines for remote procedure calls
pread (2): read from or write to a file descriptor at a given offset
pread64 (2): read from or write to a file descriptor at a given offset
prlimit (1): get and set process resource limits
prlimit (2): get/set resource limits
vlimit (3): get/set resource limits
prlimit64 (2): get/set resource limits
pthread_attr_getaffinity_np (3): set/get CPU affinity attribute in thread at...
pthread_attr_getdetachstate (3): set/get detach state attribute in thread at...
pthread_attr_getguardsize (3): set/get guard size attribute in thread attrib...
pthread_attr_getinheritsched (3): set/get inherit-scheduler attribute in thr...
pthread_attr_getschedparam (3): set/get scheduling parameter attributes in t...
pthread_attr_getschedpolicy (3): set/get scheduling policy attribute in thre...
pthread_attr_getscope (3): set/get contention scope attribute in thread attr...
pthread_attr_getstack (3): set/get stack attributes in thread attributes object
pthread_attr_getstackaddr (3): set/get stack address attribute in thread att...
pthread_attr_getstacksize (3): set/get stack size attribute in thread attrib...
pthread_attr_setaffinity_np (3): set/get CPU affinity attribute in thread at...
pthread_attr_setdetachstate (3): set/get detach state attribute in thread at...
pthread_attr_setguardsize (3): set/get guard size attribute in thread attrib...
pthread_attr_setinheritsched (3): set/get inherit-scheduler attribute in thr...
pthread_attr_setschedparam (3): set/get scheduling parameter attributes in t...
pthread_attr_setschedpolicy (3): set/get scheduling policy attribute in thre...
pthread_attr_setscope (3): set/get contention scope attribute in thread attr...
pthread_attr_setstack (3): set/get stack attributes in thread attributes object
pthread_attr_setstackaddr (3): set/get stack address attribute in thread att...
pthread_attr_setstacksize (3): set/get stack size attribute in thread attrib...
pthread_getaffinity_np (3): set/get CPU affinity of a thread
pthread_getattr_default_np (3): get or set default thread-creation attributes
pthread_getconcurrency (3): set/get the concurrency level
pthread_getname_np (3): set/get the name of a thread
pthread_getschedparam (3): set/get scheduling policy and parameters of a thread
pthread_mutexattr_getpshared (3): get/set process-shared mutex attribute
pthread_mutexattr_getrobust (3): get and set the robustness attribute of a m...
pthread_mutexattr_getrobust_np (3): get and set the robustness attribute of ...
pthread_mutexattr_setpshared (3): get/set process-shared mutex attribute
pthread_mutexattr_setrobust (3): get and set the robustness attribute of a m...
pthread_mutexattr_setrobust_np (3): get and set the robustness attribute of ...
pthread_rwlockattr_getkind_np (3): set/get the read-write lock kind of the t...
pthread_rwlockattr_setkind_np (3): set/get the read-write lock kind of the t...
pthread_setaffinity_np (3): set/get CPU affinity of a thread
pthread_setattr_default_np (3): get or set default thread-creation attributes
pthread_setcancelstate (3): set cancelability state and type
pthread_setcanceltype (3): set cancelability state and type
pthread_setconcurrency (3): set/get the concurrency level
pthread_setname_np (3): set/get the name of a thread
pthread_setschedparam (3): set/get scheduling policy and parameters of a thread
pthread_setschedprio (3): set scheduling priority of a thread
pwrite (2): read from or write to a file descriptor at a given offset
pwrite64 (2): read from or write to a file descriptor at a given offset
pysetup3.8 (1): pysetup tool
reset (1): terminal initialization
rewinddir (3): reset directory stream
sched_getaffinity (2): set and get a thread's CPU affinity mask
sched_getattr (2): set and get scheduling policy and attributes
sched_getparam (2): set and get scheduling parameters
sched_getscheduler (2): set and get scheduling policy/parameters
sched_setaffinity (2): set and get a thread's CPU affinity mask
sched_setattr (2): set and get scheduling policy and attributes
sched_setparam (2): set and get scheduling parameters
sched_setscheduler (2): set and get scheduling policy/parameters
seekdir (3): set the position of the next readdir() call in the dir...
semget (2): get a System V semaphore set identifier
set_mempolicy (2): set default NUMA memory policy for a thread and its ch...
set_robust_list (2): get/set list of robust futexes
set_thread_area (2): manipulate thread-local storage information
set_tid_address (2): set pointer to thread ID
setaliasent (3): read an alias entry
setarch (8): change reported architecture in new program environmen...
setbuf (3): stream buffering operations
setbuffer (3): stream buffering operations
setcap (8): set file capabilities
setcontext (2): get or set the user context
setcontext (3): get or set the user context
setdomainname (2): get/set NIS domain name
setegid (2): set effective user or group ID
setenv (3): change or add an environment variable
seteuid (2): set effective user or group ID
setfont (8): load EGA/VGA console screen font
setfsent (3): handle fstab entries
setfsgid (2): set group identity used for filesystem checks
setfsgid32 (2): set group identity used for filesystem checks
setfsuid (2): set user identity used for filesystem checks
setfsuid32 (2): set user identity used for filesystem checks
setgid (2): set group identity
setgid32 (2): set group identity
setgrent (3): get group file entry
setgroups (2): get/set list of supplementary group IDs
setgroups32 (2): get/set list of supplementary group IDs
sethostent (3): get network host entry
sethostid (2): get or set the unique identifier of the current host
sethostid (3): get or set the unique identifier of the current host
sethostname (2): get/set hostname
setitimer (2): get or set value of an interval timer
setjmp (3): performing a nonlocal goto
setkey (3): encrypt 64-bit messages
setkey_r (3): encrypt 64-bit messages
setkeycodes (8): load kernel scancode-to-keycode mapping table entries
setleds (1): set the keyboard leds
setlinebuf (3): stream buffering operations
setlocale (3): set the current locale
setlogcons (8): Send kernel messages to console N
setlogmask (3): set log priority mask
setmetamode (1): define the keyboard meta key handling
setmntent (3): get filesystem descriptor file entry
setnetent (3): get network entry
setnetgrent (3): handle network group entries
setns (2): reassociate thread with a namespace
setpci (8): configure PCI devices
setpgid (2): set/get process group
setpgrp (2): set/get process group
setpriority (2): get/set program scheduling priority
setpriv (1): run a program with different Linux privilege settings
setprotoent (3): get protocol entry
setpwent (3): get password file entry
setregid (2): set real and/or effective user or group ID
setregid32 (2): set real and/or effective user or group ID
setresgid (2): set real, effective and saved user or group ID
setresgid32 (2): set real, effective and saved user or group ID
setresuid (2): set real, effective and saved user or group ID
setresuid32 (2): set real, effective and saved user or group ID
setreuid (2): set real and/or effective user or group ID
setreuid32 (2): set real and/or effective user or group ID
setrlimit (2): get/set resource limits
setrpcent (3): get RPC entry
setservent (3): get service entry
setsid (1): run a program in a new session
setsid (2): creates a session and sets the process group ID
setsockopt (2): get and set options on sockets
setspent (3): get shadow password file entry
setstate (3): random number generator
setstate_r (3): reentrant random number generator
setterm (1): set terminal attributes
settimeofday (2): get / set time
setttyent (3): get ttys file entry
setuid (2): set user identity
setuid32 (2): set user identity
setup (2): setup devices and filesystems, mount root filesystem
setupcon (1): sets up the font and the keyboard on the console
setusershell (3): get permitted user shells
setutent (3): access utmp file entries
setutxent (3): access utmp file entries
setvbuf (3): stream buffering operations
setvesablank (8): Turn VESA screen blanking on or off
setvtrgb (1): customize the console color map
setvtrgb (8): set the virtual terminal RGB colors
setxattr (2): set an extended attribute value
sg_ident (8): send SCSI REPORT/SET IDENTIFYING INFORMATION command
sg_reset (8): sends SCSI device, target, bus or host reset; or check...
sg_reset_wp (8): send SCSI RESET WRITE POINTER command
sg_sat_set_features (8): use ATA SET FEATURES command via a SCSI to ATA Tran...
sg_stpg (8): send SCSI SET TARGET PORT GROUPS command
sg_timestamp (8): report or set timestamp on SCSI device
sigaddset (3): POSIX signal set operations
sigaltstack (2): set and/or get signal stack context
sigandset (3): POSIX signal set operations
sigdelset (3): POSIX signal set operations
sigemptyset (3): POSIX signal set operations
sigfillset (3): POSIX signal set operations
sigisemptyset (3): POSIX signal set operations
sigismember (3): POSIX signal set operations
sigorset (3): POSIX signal set operations
sigset (3): System V signal API
sigsetjmp (3): performing a nonlocal goto
sigsetmask (3): BSD signal API
sigsetops (3): POSIX signal set operations
sigstack (3): set and/or get signal stack context
snapd-env-generator (8): internal tool to set /snap/bin to PATH
ssetmask (2): manipulation of signal mask (obsolete)
stime (2): set time
strpbrk (3): search a string for any of a set of bytes
stty (1): change and print terminal line settings
svc_getreqset (3): library routines for remote procedure calls
syslog (3): read and/or clear kernel message ring buffer; set cons...
systemd-cryptsetup (8): Full disk decryption logic
systemd-cryptsetup-generator (8): Unit generator for /etc/crypttab
systemd-cryptsetup@.service (8): Full disk decryption logic
systemd-machine-id-setup (1): Initialize the machine ID in /etc/machine-id
systemd-tmpfiles-setup-dev.service (8): Creates, deletes and cleans up volat...
systemd-tmpfiles-setup.service (8): Creates, deletes and cleans up volatile ...
systemd-udev-settle.service (8): Wait for all pending udev events to be handled
systemd-veritysetup (8): Disk integrity protection logic
systemd-veritysetup-generator (8): Unit generator for integrity protected bl...
systemd-veritysetup@.service (8): Disk integrity protection logic
systemd.preset (5): Service enablement presets
systemd.resource-control (5): Resource control unit settings
tabs (1): set tabs on a terminal
taskset (1): set or retrieve a process's CPU affinity
tc (8): show / manipulate traffic control settings
tcdrain (3): get and set terminal attributes, line control, get and...
tcflow (3): get and set terminal attributes, line control, get and...
tcflush (3): get and set terminal attributes, line control, get and...
tcgetattr (3): get and set terminal attributes, line control, get and...
tcgetpgrp (3): get and set terminal foreground process group
tcsendbreak (3): get and set terminal attributes, line control, get and...
tcsetattr (3): get and set terminal attributes, line control, get and...
tcsetpgrp (3): get and set terminal foreground process group
termios (3): get and set terminal attributes, line control, get and...
Text::Iconv (3pm): Perl interface to iconv() codeset conversion function
textdomain (3): set domain for future gettext() calls
timer_settime (2): arm/disarm and fetch state of POSIX per-process timer
timerfd_settime (2): timers that notify via file descriptors
timerisset (3): timeval operations
tis-620 (7): ISO 8859-11 character set encoded in octal, decimal, a...
tset (1): terminal initialization
tzset (3): initialize time conversion information
ugetrlimit (2): get/set resource limits
ulimit (3): get and set user limits
umask (2): set file mode creation mask
unicode (7): universal character set
unsetenv (3): change or add an environment variable
update-locale (8): Modify global locale settings
uselocale (3): set/get the locale for the calling thread
user-dirs.defaults (5): default settings for XDG user dirs
user-dirs.dirs (5): settings for XDG user dirs
veritysetup (8): manage dm-verity (block level verification) volumes
wcscspn (3): search a wide-character string for any of a set of wid...
wcspbrk (3): search a wide-character string for any of a set of wid...
wmemset (3): fill an array of wide-characters with a constant wide ...
xdr_setpos (3): library routines for external data representation
xtables-legacy (8): iptables using old getsockopt/setsockopt-based kernel api
xtables-legacy-multi (8): iptables using old getsockopt/setsockopt-based ker...
xtables-monitor (8): show changes to rule set and trace-events
ypdomainname (1): show or set the system's NIS/YP domain name
zramctl (8): set up and control zram devices