Minix Man Pages
home | help- modules (5)
- kernel modules to load at boot time
- boot (7)
- System bootup process based on UNIX System V Release 4
- bootctl (1)
- Control the firmware and boot manager settings
- bootparam (7)
- introduction to boot time parameters of the Linux kernel
- bootup (7)
- System bootup process
- grub-bios-setup (8)
- set up a device to boot using GRUB
- grub-mkimage (1)
- make a bootable image of GRUB
- grub-mknetdir (1)
- prepare a GRUB netboot directory.
- grub-reboot (8)
- set the default boot entry for GRUB, for the next boot...
- grub-set-default (8)
- set the saved default boot entry for GRUB
- halt (8)
- Halt, power-off or reboot the machine
- initrd (4)
- boot loader initialized RAM disk
- iscsistart (8)
- iSCSI boot tool
- loader.conf (5)
- Configuration file for systemd-boot
- modules-load.d (5)
- Configure kernel modules to load at boot
- plymouth (8)
- A graphical boot system and logger
- poweroff (8)
- Halt, power-off or reboot the machine
- reboot (2)
- reboot or enable/disable Ctrl-Alt-Del
- reboot (8)
- Halt, power-off or reboot the machine
- rescan-scsi-bus.sh (8)
- script to add and remove SCSI devices without rebooting
- sbattach (1)
- UEFI secure boot detached signature tool
- sbsign (1)
- UEFI secure boot signing tool
- sbverify (1)
- UEFI secure boot verification tool
- sd-boot (7)
- A simple UEFI boot manager
- shutdown (8)
- Halt, power-off or reboot the machine
- sysctl.d (5)
- Configure kernel parameters at boot
- systemd-bless-boot (8)
- Mark current boot process as successful
- systemd-bless-boot-generator (8)
- Pull systemd-bless-boot.service into the i...
- systemd-bless-boot.service (8)
- Mark current boot process as successful
- systemd-boot (7)
- A simple UEFI boot manager
- systemd-boot-check-no-failures (8)
- verify that the system booted up cleanly
- systemd-boot-check-no-failures.service (8)
- verify that the system booted up...
- systemd-boot-system-token.service (8)
- Generate an initial boot loader syste...
- systemd-modules-load (8)
- Load kernel modules at boot
- systemd-modules-load.service (8)
- Load kernel modules at boot
- systemd-random-seed (8)
- Load and save the system random seed at boot and sh...
- systemd-reboot.service (8)
- System shutdown logic
- systemd-rfkill (8)
- Load and save the RF kill switch state at boot and change
- systemd-rfkill.service (8)
- Load and save the RF kill switch state at boot a...
- systemd-rfkill.socket (8)
- Load and save the RF kill switch state at boot an...
- systemd-sysctl (8)
- Configure kernel parameters at boot
- systemd-sysctl.service (8)
- Configure kernel parameters at boot
- systemd-system-update-generator (8)
- Generator for redirecting boot to offli...
- systemd-update-utmp (8)
- Write audit and utmp updates at bootup, runlevel ch...
- systemd-update-utmp.service (8)
- Write audit and utmp updates at bootup, run...
- systemd-user-sessions (8)
- Permit user logins after boot, prohibit user logi...
- systemd-user-sessions.service (8)
- Permit user logins after boot, prohibit u...
- update-grub-gfxpayload (8)
- update /boot/grub/gfxblacklist.txt