Minix Man Pages
home | helpx minix x x minixx SIGNAL-SAFETY(7) Linux Programmer's Manual SIGNAL-SAFETY(7) NAME signal-safety - async-signal-safe functions DESCRIPTION An async-signal-safe function is one that can be safely called from within a signal handler. Many functions are not async-signal-safe. In particular, nonreentrant functions are generally unsafe to call from a signal handler. The kinds of issues that render a function unsafe can be quickly under- stood when one considers the implementation of the stdio library, all of whose functions are not async-signal-safe. When performing buffered I/O on a file, the stdio functions must main- tain a statically allocated data buffer along with associated counters and indexes (or pointers) that record the amount of data and the cur- rent position in the buffer. Suppose that the main program is in the middle of a call to a stdio function such as printf(3) where the buffer and associated variables have been partially updated. If, at that mo- ment, the program is interrupted by a signal handler that also calls printf(3), then the second call to printf(3) will operate on inconsis- tent data, with unpredictable results. To avoid problems with unsafe functions, there are two possible choices: 1. Ensure that (a) the signal handler calls only async-signal-safe functions, and (b) the signal handler itself is reentrant with re- spect to global variables in the main program. 2. Block signal delivery in the main program when calling functions that are unsafe or operating on global data that is also accessed by the signal handler. Generally, the second choice is difficult in programs of any complex- ity, so the first choice is taken. POSIX.1 specifies a set of functions that an implementation must make async-signal-safe. (An implementation may provide safe implementations of additional functions, but this is not required by the standard and other implementations may not provide the same guarantees.) In general, a function is async-signal-safe either because it is reen- trant or because it is atomic with respect to signals (i.e., its execu- tion can't be interrupted by a signal handler). The set of functions required to be async-signal-safe by POSIX.1 is shown in the following table. The functions not otherwise noted were required to be async-signal-safe in POSIX.1-2001; the table details changes in the subsequent standards. Function Notes abort(3) Added in POSIX.1-2003 accept(2) access(2) aio_error(3) aio_return(3) aio_suspend(3) See notes below alarm(2) bind(2) cfgetispeed(3) cfgetospeed(3) cfsetispeed(3) cfsetospeed(3) chdir(2) chmod(2) chown(2) clock_gettime(2) close(2) connect(2) creat(2) dup(2) dup2(2) execl(3) Added in POSIX.1-2008; see notes below execle(3) See notes below execv(3) Added in POSIX.1-2008 execve(2) _exit(2) _Exit(2) faccessat(2) Added in POSIX.1-2008 fchdir(2) Added in POSIX.1-2013 fchmod(2) fchmodat(2) Added in POSIX.1-2008 fchown(2) fchownat(2) Added in POSIX.1-2008 fcntl(2) fdatasync(2) fexecve(3) Added in POSIX.1-2008 ffs(3) Added in POSIX.1-2016 fork(2) See notes below fstat(2) fstatat(2) Added in POSIX.1-2008 fsync(2) ftruncate(2) futimens(3) Added in POSIX.1-2008 getegid(2) geteuid(2) getgid(2) getgroups(2) getpeername(2) getpgrp(2) getpid(2) getppid(2) getsockname(2) getsockopt(2) getuid(2) htonl(3) Added in POSIX.1-2016 htons(3) Added in POSIX.1-2016 kill(2) link(2) linkat(2) Added in POSIX.1-2008 listen(2) longjmp(3) Added in POSIX.1-2016; see notes below lseek(2) lstat(2) memccpy(3) Added in POSIX.1-2016 memchr(3) Added in POSIX.1-2016 memcmp(3) Added in POSIX.1-2016 memcpy(3) Added in POSIX.1-2016 memmove(3) Added in POSIX.1-2016 memset(3) Added in POSIX.1-2016 mkdir(2) mkdirat(2) Added in POSIX.1-2008 mkfifo(3) mkfifoat(3) Added in POSIX.1-2008 mknod(2) Added in POSIX.1-2008 mknodat(2) Added in POSIX.1-2008 ntohl(3) Added in POSIX.1-2016 ntohs(3) Added in POSIX.1-2016 open(2) openat(2) Added in POSIX.1-2008 pause(2) pipe(2) poll(2) posix_trace_event(3) pselect(2) pthread_kill(3) Added in POSIX.1-2013 pthread_self(3) Added in POSIX.1-2013 pthread_sigmask(3) Added in POSIX.1-2013 raise(3) read(2) readlink(2) readlinkat(2) Added in POSIX.1-2008 recv(2) recvfrom(2) recvmsg(2) rename(2) renameat(2) Added in POSIX.1-2008 rmdir(2) select(2) sem_post(3) send(2) sendmsg(2) sendto(2) setgid(2) setpgid(2) setsid(2) setsockopt(2) setuid(2) shutdown(2) sigaction(2) sigaddset(3) sigdelset(3) sigemptyset(3) sigfillset(3) sigismember(3) siglongjmp(3) Added in POSIX.1-2016; see notes below signal(2) sigpause(3) sigpending(2) sigprocmask(2) sigqueue(2) sigset(3) sigsuspend(2) sleep(3) sockatmark(3) Added in POSIX.1-2004 socket(2) socketpair(2) stat(2) stpcpy(3) Added in POSIX.1-2016 stpncpy(3) Added in POSIX.1-2016 strcat(3) Added in POSIX.1-2016 strchr(3) Added in POSIX.1-2016 strcmp(3) Added in POSIX.1-2016 strcpy(3) Added in POSIX.1-2016 strcspn(3) Added in POSIX.1-2016 strlen(3) Added in POSIX.1-2016 strncat(3) Added in POSIX.1-2016 strncmp(3) Added in POSIX.1-2016 strncpy(3) Added in POSIX.1-2016 strnlen(3) Added in POSIX.1-2016 strpbrk(3) Added in POSIX.1-2016 strrchr(3) Added in POSIX.1-2016 strspn(3) Added in POSIX.1-2016 strstr(3) Added in POSIX.1-2016 strtok_r(3) Added in POSIX.1-2016 symlink(2) symlinkat(2) Added in POSIX.1-2008 tcdrain(3) tcflow(3) tcflush(3) tcgetattr(3) tcgetpgrp(3) tcsendbreak(3) tcsetattr(3) tcsetpgrp(3) time(2) timer_getoverrun(2) timer_gettime(2) timer_settime(2) times(2) umask(2) uname(2) unlink(2) unlinkat(2) Added in POSIX.1-2008 utime(2) utimensat(2) Added in POSIX.1-2008 utimes(2) Added in POSIX.1-2008 wait(2) waitpid(2) wcpcpy(3) Added in POSIX.1-2016 wcpncpy(3) Added in POSIX.1-2016 wcscat(3) Added in POSIX.1-2016 wcschr(3) Added in POSIX.1-2016 wcscmp(3) Added in POSIX.1-2016 wcscpy(3) Added in POSIX.1-2016 wcscspn(3) Added in POSIX.1-2016 wcslen(3) Added in POSIX.1-2016 wcsncat(3) Added in POSIX.1-2016 wcsncmp(3) Added in POSIX.1-2016 wcsncpy(3) Added in POSIX.1-2016 wcsnlen(3) Added in POSIX.1-2016 wcspbrk(3) Added in POSIX.1-2016 wcsrchr(3) Added in POSIX.1-2016 wcsspn(3) Added in POSIX.1-2016 wcsstr(3) Added in POSIX.1-2016 wcstok(3) Added in POSIX.1-2016 wmemchr(3) Added in POSIX.1-2016 wmemcmp(3) Added in POSIX.1-2016 wmemcpy(3) Added in POSIX.1-2016 wmemmove(3) Added in POSIX.1-2016 wmemset(3) Added in POSIX.1-2016 write(2) Notes: * POSIX.1-2001 and POSIX.1-2004 required the functions fpathconf(3), pathconf(3), and sysconf(3) to be async-signal-safe, but this re- quirement was removed in POSIX.1-2008. * If a signal handler interrupts the execution of an unsafe function, and the handler terminates via a call to longjmp(3) or siglongjmp(3) and the program subsequently calls an unsafe function, then the be- havior of the program is undefined. * POSIX.1-2003 clarified that if an application calls fork(2) from a signal handler and any of the fork handlers registered by pthread_atfork(3) calls a function that is not async-signal-safe, the behavior is undefined. A future revision of the standard is likely to remove fork(2) from the list of async-signal-safe func- tions. * Asynchronous signal handlers that call functions which are cancella- tion points and nest over regions of deferred cancellation may trig- ger cancellation whose behavior is as if asynchronous cancellation had occurred and may cause application state to become inconsistent. Deviations in the GNU C library The following known deviations from the standard occur in the GNU C li- brary: * Before glibc 2.24, execl(3) and execle(3) employed realloc(3) inter- nally and were consequently not async-signal-safe. This was fixed in glibc 2.24. * The glibc implementation of aio_suspend(3) is not async-signal-safe because it uses pthread_mutex_lock(3) internally. SEE ALSO sigaction(2), signal(7), standards(7) COLOPHON This page is part of release 5.05 of the Linux man-pages project. A description of the project, information about reporting bugs, and the latest version of this page, can be found at https://www.kernel.org/doc/man-pages/. Linux 2019-10-10 SIGNAL-SAFETY(7)
NAME | DESCRIPTION | SEE ALSO | COLOPHON