Minix Man Pages

Man Page or Keyword Search:
Man Architecture
Apropos Keyword Search (all sections) Output format
home | help
x minix x
x minixx
PVSCAN(8)                   System Manager's Manual                  PVSCAN(8)

NAME
       pvscan - List all physical volumes

SYNOPSIS
       pvscan option_args
           [ option_args ]
           [ position_args ]

DESCRIPTION
       When called without the --cache option, pvscan lists PVs on the system,
       like pvs(8) or pvdisplay(8).

       When the --cache and -aay options are used, pvscan  records  which  PVs
       are  available on the system, and activates LVs in completed VGs.  A VG
       is complete when pvscan sees that the final PV in the VG has  appeared.
       This  is used by event-based system startup (systemd, udev) to activate
       LVs.

       The four main variations of this are:

       pvscan --cache device

       If device is present, lvm adds a record that the PV on  device  is  on-
       line.   If device is not present, lvm removes the online record for the
       PV.  In most cases, the pvscan will only read the named devices.

       pvscan --cache -aay device...

       This begins by performing the same steps as above.  Afterward,  if  the
       VG  for  the specified PV is complete, then pvscan will activate LVs in
       the VG (the same as vgchange -aay vgname would do.)

       pvscan --cache

       This first clears all existing PV online records, then  scans  all  de-
       vices  on  the  system,  adding  PV online records for any PVs that are
       found.

       pvscan --cache -aay

       This begins by performing the same steps as pvscan --cache.  Afterward,
       it activates LVs in any complete VGs.

       To  prevent  devices  from being scanned by pvscan --cache, add them to
       lvm.conf(5) devices/global_filter.  For more information, see:
       lvmconfig --withcomments devices/global_filter

       Auto-activation of VGs or LVs can be enabled/disabled using:
       lvm.conf(5) activation/auto_activation_volume_list

       For more information, see:
       lvmconfig --withcomments activation/auto_activation_volume_list

       To disable auto-activation, explicitly set this list to an empty  list,
       i.e. auto_activation_volume_list = [ ].

       When this setting is undefined (e.g. commented), then all LVs are auto-
       activated.

USAGE
       Display PV information.

       pvscan
           [ -e|--exported ]
           [ -n|--novolumegroup ]
           [ -s|--short ]
           [ -u|--uuid ]
           [ COMMON_OPTIONS ]

       Autoactivate a VG when all PVs are online.

       pvscan --cache
           [ -a|--activate ay ]
           [ -j|--major Number ]
           [    --minor Number ]
           [    --noudevsync ]
           [ COMMON_OPTIONS ]
           [ String|PV ... ]

       Common options for command:
           [    --ignorelockingfailure ]
           [    --reportformat basic|json ]

       Common options for lvm:
           [ -d|--debug ]
           [ -h|--help ]
           [ -q|--quiet ]
           [ -t|--test ]
           [ -v|--verbose ]
           [ -y|--yes ]
           [    --commandprofile String ]
           [    --config String ]
           [    --driverloaded y|n ]
           [    --lockopt String ]
           [    --longhelp ]
           [    --nolocking ]
           [    --profile String ]
           [    --version ]

OPTIONS
       -a|--activate y|n|ay
              Auto-activate LVs in a VG when the PVs scanned have completed
              the VG.  (Only ay is applicable.)

       --cache
              Scan one or more devices and record that they are online.

       --commandprofile String
              The command profile to use for command configuration.  See
              lvm.conf(5) for more information about profiles.

       --config String
              Config settings for the command. These override lvm.conf set-
              tings.  The String arg uses the same format as lvm.conf, or may
              use section/field syntax.  See lvm.conf(5) for more information
              about config.

       -d|--debug ...
              Set debug level. Repeat from 1 to 6 times to increase the detail
              of messages sent to the log file and/or syslog (if configured).

       --driverloaded y|n
              If set to no, the command will not attempt to use device-mapper.
              For testing and debugging.

       -e|--exported
              Only show PVs belonging to exported VGs.

       -h|--help
              Display help text.

       --ignorelockingfailure
              Allows a command to continue with read-only metadata operations
              after locking failures.

       --lockopt String
              Used to pass options for special cases to lvmlockd.  See lvm-
              lockd(8) for more information.

       --longhelp
              Display long help text.

       -j|--major Number
              The major number of a device.

       --minor Number
              The minor number of a device.

       --nolocking
              Disable locking.

       --noudevsync
              Disables udev synchronisation. The process will not wait for no-
              tification from udev. It will continue irrespective of any pos-
              sible udev processing in the background. Only use this if udev
              is not running or has rules that ignore the devices LVM creates.

       -n|--novolumegroup
              Only show PVs not belonging to any VG.

       --profile String
              An alias for --commandprofile or --metadataprofile, depending on
              the command.

       -q|--quiet ...
              Suppress output and log messages. Overrides --debug and --ver-
              bose.  Repeat once to also suppress any prompts with answer
              'no'.

       --reportformat basic|json
              Overrides current output format for reports which is defined
              globally by the report/output_format setting in lvm.conf.  basic
              is the original format with columns and rows.  If there is more
              than one report per command, each report is prefixed with the
              report name for identification. json produces report output in
              JSON format. See lvmreport(7) for more information.

       -s|--short
              Short listing format.

       -t|--test
              Run in test mode. Commands will not update metadata.  This is
              implemented by disabling all metadata writing but nevertheless
              returning success to the calling function. This may lead to un-
              usual error messages in multi-stage operations if a tool relies
              on reading back metadata it believes has changed but hasn't.

       -u|--uuid
              Show UUIDs in addition to device names.

       -v|--verbose ...
              Set verbose level. Repeat from 1 to 4 times to increase the de-
              tail of messages sent to stdout and stderr.

       --version
              Display version information.

       -y|--yes
              Do not prompt for confirmation interactively but always assume
              the answer yes. Use with extreme caution.  (For automatic no,
              see -qq.)

VARIABLES
       PV
              Physical  Volume  name,  a device path under /dev.  For commands
              managing physical extents, a PV positional arg generally accepts
              a suffix indicating a range (or multiple ranges) of physical ex-
              tents (PEs). When the first PE is omitted, it  defaults  to  the
              start of the device, and when the last PE is omitted it defaults
              to end.  Start and end range (inclusive):  PV[:PE-PE]...   Start
              and length range (counting from 0): PV[:PE+PE]...

       String
              See the option description for information about the string con-
              tent.

       Size[UNIT]
              Size is an input number that accepts an  optional  unit.   Input
              units are always treated as base two values, regardless of capi-
              talization, e.g. 'k' and 'K' both refer to  1024.   The  default
              input unit is specified by letter, followed by |UNIT.  UNIT rep-
              resents other possible input units:  bBsSkKmMgGtTpPeE.   b|B  is
              bytes,  s|S  is  sectors  of 512 bytes, k|K is kilobytes, m|M is
              megabytes, g|G is gigabytes, t|T is terabytes, p|P is petabytes,
              e|E  is  exabytes.  (This should not be confused with the output
              control --units, where capital letters mean multiple of 1000.)

ENVIRONMENT VARIABLES
       See lvm(8) for information about environment  variables  used  by  lvm.
       For example, LVM_VG_NAME can generally be substituted for a required VG
       parameter.

SEE ALSO
       lvm(8) lvm.conf(5) lvmconfig(8)

       pvchange(8)  pvck(8)  pvcreate(8)  pvdisplay(8)  pvmove(8)  pvremove(8)
       pvresize(8) pvs(8) pvscan(8)

       vgcfgbackup(8)  vgcfgrestore(8)  vgchange(8) vgck(8) vgcreate(8) vgcon-
       vert(8)  vgdisplay(8)  vgexport(8)  vgextend(8)  vgimport(8)  vgimport-
       clone(8)  vgmerge(8)  vgmknodes(8)  vgreduce(8) vgremove(8) vgrename(8)
       vgs(8) vgscan(8) vgsplit(8)

       lvcreate(8) lvchange(8)  lvconvert(8)  lvdisplay(8)  lvextend(8)  lvre-
       duce(8) lvremove(8) lvrename(8) lvresize(8) lvs(8) lvscan(8)

       lvm-fullreport(8) lvm-lvpoll(8) lvm2-activation-generator(8) blkdeacti-
       vate(8) lvmdump(8)

       dmeventd(8) lvmpolld(8)  lvmlockd(8)  lvmlockctl(8)  cmirrord(8)  lvmd-
       busd(8)

       lvmsystemid(7) lvmreport(7) lvmraid(7) lvmthin(7) lvmcache(7)

Red Hat, Inc.          LVM TOOLS 2.03.07(2) (2019-11-30)             PVSCAN(8)

NAME | SYNOPSIS | DESCRIPTION | USAGE | OPTIONS | VARIABLES | ENVIRONMENT VARIABLES | SEE ALSO