Minix Man Pages

home | help
x minix x
x minixx
IP-SR(8)                             Linux                            IP-SR(8)

NAME
       ip-sr - IPv6 Segment Routing management

SYNOPSIS
       ip sr  { COMMAND | help }

       ip sr hmac show

       ip sr hmac set KEYID ALGO

       ip sr tunsrc show

       ip sr tunsrc set ADDRESS

DESCRIPTION
       The ip sr command is used to configure IPv6 Segment Routing (SRv6) in-
       ternal parameters.

       Those parameters include the mapping between an HMAC key ID and its as-
       sociated hashing algorithm and secret, and the IPv6 address to use as
       source for encapsulated packets.

       The ip sr hmac set command prompts for a passphrase that will be used
       as the HMAC secret for the corresponding key ID. A blank passphrase re-
       moves the mapping.  The currently supported algorithms for ALGO are
       sha1 and sha256.

       If the tunnel source is set to the address :: (which is the default),
       then an address of the egress interface will be selected. As this oper-
       ation may hinder performances, it is recommended to set a non-default
       address.

EXAMPLES
   Configure an HMAC mapping for key ID 42 and hashing algorithm SHA-256
       # ip sr hmac set 42 sha256

   Set the tunnel source address to 2001:db8::1
       # ip sr tunsrc set 2001:db8::1

SEE ALSO
       ip-route(8)

AUTHOR
       David Lebrun <david.lebrun@uclouvain.be>

iproute2                          14 Apr 2017                         IP-SR(8)
NAME | SYNOPSIS | DESCRIPTION | EXAMPLES | SEE ALSO | AUTHOR